Needed an outdoor space ,protected from the elements.Bit of a handyman so set out footings and knocked up the framework.Had an engineer to pass off my footings and spacing. Bought 100 mm,6 mtr x 1 mtr insulated roofing panels.
Materials
Bags of cement and aggregate and sand
Stirrups
Galvanised coach bolts and nuts
Joist hangers
Heavy duty galvanised clout nails for joist hangers
140 x 45 mm h3 treated pine timbers
Tools
Petrol post-hole digger
shovels
large pinch bar
wheelbarrow
wTer level
circular saw
impact driver
camoflage deck kit for secret screwing
handsaw
electric planer
Steps
Step 1
Step1-mark out string lines and pegs
step 2-dig out footings
step 3 -anka-screw ledger beam to house brickwork
step 4-fit 6 mtr x6 mtr frame
step 5- check diagonals for alignment
step 6- install bearers
step 7-install joists (both are at same height )
step 8- lay decking (A grade treated pine)
Step 2
set out framework

Step 3
Start to dig out footings

Step 4
Install bearers and joists

Step 5

Used joist hangers and a half checked housing for more strenth
Step 6

Start to install the 6 roofing panels
Step 7
Now I had protection to start laying the deck

Step 8
Deck is finished

Step 9
Last jobs were staining the deck,handrails installed ,ballastrad installed and painted fibro sheets lining the side rails

Finish