How to assemble my wheelbarrow?

I tried to assemble a wheelbarrow that I purchased from Bunnings a few years ago,unfortunately I lost the instructions and cannot assemble the last section which is attaching the two struts from barrow to wheel .Sorry I cannot attach photo but was wondering if I brought the barrow to a Bunnings store would someone be able to show me what to do.

Find more posts tagged with

Tools and Materials

Repairing

Comments

Jason

Welcome to Bunnings Workshop @Halinao. We're pleased to have you join the community.

I'm sure we'd be able to give you instructions if we had a photo or two of the wheelbarrow. There are instructions here how to add a photo to your post, or you could email workshop@bunnings.com.au and we could add it for you.

Jason

Halinao

IMG_1767[1].JPG IMG_1768[1].JPG

EricL

https://www.workshop.bunnings.com.au/discussion/comment/55597#Comment_55597

Hello @Halinao

Thank you for sharing the pictures of your wheelbarrow. Can I please ask for one more favour, and that is to place the wheel and all the loose parts onto your outdoor table. Please line them up neatly so that we can clearly see each parts profile. This will help us try to identify your wheelbarrow or at least allow us to give you recommendations on how to assemble it.

Eric

Halinao

https://www.workshop.bunnings.com.au/discussion/comment/90057#Comment_90057

Thank you Eric,

The problem is the front of the barrow is too near the wheel and I cannot fit the struts from the wheel to the top of the barrow,,have I got the wheel support upside down I mean the part that goes round the wheel.?

EricL

https://www.workshop.bunnings.com.au/discussion/comment/110879#Comment_110879

Hello @Halinao

Your analysis of the installation confirmed one of my suspicions when I first saw the wheelbarrow. It appears that the wheel support has been installed upside down thereby preventing the wheel from being installed correctly. But as I mentioned in my last post if you can line up the parts on the table and post a photo, we might be able to intuitively guess the position of the parts.

If you need further assistance, please let us know.

Eric

Halinao

https://www.workshop.bunnings.com.au/discussion/comment/122818#Comment_122818

I will try reversing the wheel support and try again Thank you.

EricL

https://www.workshop.bunnings.com.au/discussion/comment/130618#Comment_130618

Hello @Halinao

If you need further assistance with your wheelbarrow's assembly, please let us know.

Eric

Child Item