Can you cut decorative screens?

Hi guys, tell me, can the decorative screens be cut down at all and then frames reattached? The problem I have is 2 x 2 metre gaps I want to infill but the decorative screens are either 1.8 metres or 2.4 metres. I'm going to be setting them lengthways between posts.

Any help, assistance, diagrams, photos would be appreciated.

Find more posts tagged with

Tools and Materials

Repairing

Building and Construction

Fencing and Screening

Comments

MitchellMc

Hi @BobHatton,

Could you please link us to the specific decorative screen product you’re planning to use? That will help us give more accurate advice. In general, most decorative panels themselves can be cut down to size, but whether the frames can be adjusted or reattached after cutting is less certain. Generally, they are just c-channels that can also be cut down. If you can provide the product details, we can check with the manufacturer and let you know what’s possible regarding frame modifications.

Please let me know if you have any questions.

Mitchell

BobHatton

https://www.workshop.bunnings.com.au/discussion/comment/57725#Comment_57725

Hi Mitchell, this is the product we're thinking of.

Link: https://www.bunnings.com.au/jack-matrix-2410-x-1205mm-charcoal-rainforest-screen-panel-with-frame_p0012575

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/91213#Comment_91213

Yes, the screen and frame can be cut down on that product, @BobHatton. They are not designed specifically to have that done, but it is possible.

Mitchell

BobHatton

https://www.workshop.bunnings.com.au/discussion/comment/111569#Comment_111569

Thanks Mitchell - good to know. It would be even better if there was a screen of some description that 2 metres long rather than 2.4.

Do you know of any other options we can look at? It's to go between two posts to screen an outdoor area.

Thanks.

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/123231#Comment_123231

Any chance you could attach vertical lengths of 140 x 19mm SpecRite Merbau Pre-Oiled Decking - Random Lengths to the face of your posts? That would reduce the gap to 1800mm, allowing you to use the 1800mm panels. I've created the rendering below to illustrate.

Mitchell

BobHatton

https://www.workshop.bunnings.com.au/discussion/comment/130882#Comment_130882

Possibly; its something we can certainly look at - good idea!

Child Item