What garden shed base?

I’m planning to install a garden shed in the area shown in the photo. The space previously had hedge plants, which I’ve now removed.

I’d prefer not to pour a full concrete slab for the base — could you please recommend some good alternative base options?

I’m also looking for recommendations for a good-quality garden shed, preferably with in-built base..

Thanks in advance for your help!

Find more posts tagged with

Tools and Materials

Decking and Paving

Building and Construction

Flooring

Accepted answers

All comments

AlanM52

Hi @RK07,

I have always been frustrated that sheds (small to medium) should/must be installed on a concrete slab so for all the people (mainly poultry) I have helped over the years their sheds sit on a pad of concrete pavers.

Threaded rod with nuts and mudguard washers for increased purchase (grip) in concrete.

Assemble the shed.

Check that you can with assistance lift the shed off the ground about one foot.

Prepare threaded rod with nuts and mudguard washers.

Clear the area and level the ground don't worry about the depth.

Move the shed over and locate on the ground, double check the position.

Use something like a tent peg to mark four corner base frame fixing holes.

Move shed and dig four holes for stormwater pipe and hammer in so they stand.

Raise shed off ground and install the threaded rods from below with nut and washer on top.

To be safe adjust so about 20mm of thread is exposed.

Move/lift shed back in position and lower into PVC pipe, check position and fill with concrete - leave overnight.

Next session remove nuts/washers and lift/move shed to one side.

Continue in the usual way to lay pavers.

For the threaded rod pavers apply grease to the rod tip.

Holding the paver from above do your best to align the paver and drop onto rod to make hole location.

Drill hole with masonry drill bit and if paver paver doesn't align rotate and have another go.

Drill holes for the other base frame holes and secure with long tent pegs.

Hope all that makes sense because this morning I woke up like where am I what happened?

Cheers

MitchellMc

Hi @RK07,

It's great to see that @AlanM52 has already responded.

The base required for your shed is usually dictated by the manufacturer. Typically, there are two main options: a concrete slab base or a timber frame base.

To give you the best advice, it would help to know a bit more about the area, specifically the size and dimensions of the space where you want the shed, as well as the features you need. For example, do you require double doors for access to larger equipment? Are you looking at a zinc or galvanised shed, a colourful steel shed, or a timber shed?

Once we know the dimensions and type of shed you’re considering, we can review the base requirements and suggest suitable options. Keep in mind that most suppliers do not recommend gravel or paving alone as a base. Sheds typically need to be bolted to a secure foundation, especially in areas prone to high winds.

Please let me know if you have any questions.

Mitchell

Child Item