Timber width that can be cross-cut using mitre saw?

I'm looking at the cheapest way to safely power-saw some lengths of timber to build shelf units. I could use a hand saw but I'm hoping to avoid the effort and risk of straining my arm. It's a one-off project at this stage, actually it would make more sense to hire a saw or pay for cutting, but I don't know if that's possible? So that's the first question, I guess.

In terms of safety, I'm assuming a circular saw is a risky option without extra equipment and experience. I do have a small DIY workbench I can screw or clamp a miter saw to for reasonably safe use.

So, if this is a good hobby choice: https://www.bunnings.com.au/ozito-1600w-210mm-8-corded-compound-mitre-saw_p0025645

CMS-1621 Hero Ed2 SQ.jpeg

My question is (since it's not in the product details online): what width of timber can it handle? I assume one can cut half way through a wider piece and then flip it over to cut the other half?

Find more posts tagged with

Tools and Materials

Accepted answers

All comments

AlanM52

Hi @GreyWolfMelb,

Screenshot 2026-01-22 204215.jpg

That info is here in the PDF manual.

Cheers

GreyWolfMelb

Thanks for the tip, Alan.

It prompted me to look a bit closer and now I see the details are actually in the Bunnings product listing in the Specifications section (dah!), I just didn't think to look there before (I'm used to just seeing basic product dimensions there). Look and learn!

I assume that the 120mm straight cut capacity means I could cut timber up to 240mm by cutting half-way then flipping over for a second cut.

EricL

Hello @GreyWolfMelb

That's correct, by flipping the timber over you can cut that 120mm again and technically it would cut the timber in half.

Please remember to wear personal protection such as gloves, goggles and a mask when operating the tool.

If you need further assistance, please let us know.

Eric

GreyWolfMelb

Thanks, Eric!

I opted for the sliding mitre saw: https://www.bunnings.com.au/ozito-1800w-210mm-8-1-4-double-bevel-sliding-mitre-saw-scms-1621_p6290587

It will clean cut without the flipping timber flip and go a long way to cutting larger boards too.

Child Item