Best Advice

One technique to remove a screw with a damaged head is to place a rubber band on top of the screw and place your drill on top of the rubber band and ...

When drilling with a masonry bit, you should be making slow progress even if the drill is not in hammer mode. You should be able to drill into it wi ...

For very light scratches on a timber floor, you might like to first try just a standard Mop and Glow Floor Cleaner. It's a cleaner and polish combin ...

There are methods to improve the appearance of wider cracks where you can clean the dirt out and then fill with clear epoxy glue. You would then colo ...

You have choices on how to proceed. It all depends on what you wish to do with your furniture. Do you wish to keep its character and not change anyth ...

To effectively remove staining from concrete, you'll first need to determine what's caused it and then treat it with an appropriate product. If it's ...

I would recommend you start here - How to fix a hole in a plaster wall. It includes the tools and materials that you will need. If there's a lot of d ...

There are several causes for a sulphur smell to occur in your water tank: Sludge and soil contamination at the bottom of your tank Poor aeration ...

You can easily fill holes in bricks with Prep 750g Watercrete Multi-Purpose Patching Cement. To help disguise the repair, mix in some Avista Oxide ...

If the existing grout is still solid and can't easily be scraped out, then you can overcoat it with Davco Rejuvenation grout. Existing grout must be ...

Use Polyfilla 100g Plaster Cracks Filler. You then must sand the excess filler back and undercoat before painting. You should find this step-by-ste ...

If you still have the chip, you can glue it back in position with Clear Epoxy Glue. But if the chip has gone missing, then you need to fill the damag ...