Best Advice

If you've tried cleaning mould from silicon previously, the mould has likely stained it. If this is the case, no amount of scrubbing or applying cle ...

There are methods to improve the appearance of wider cracks where you can clean the dirt out and then fill with clear epoxy glue. You would then colo ...

Using bleach can be a smelly process, but it is one of the best ways of killing mould and its spores. I'd suggest after a thorough cleaning for you t ...

The process for colour matching is actually not that difficult. In order to get an accurate or similar shade of colour, it will require a paint sampl ...

I used to tell my customers that nothing works except for lots of elbow grease. I went to the Bunnings Expo and these clowns were flogging 30 Second ...

I've recently started using 30 Seconds 1L Shower Cleaner and have found it really great. You don't need to scrub. Spray it on and leave it to do its ...

As long as there is an existing waterproofing layer, then an additional one doesn't need to be installed before re-tiling. You will need to check f ...

If the existing grout is still solid and can't easily be scraped out, then you can overcoat it with Davco Rejuvenation grout. Existing grout must be ...

I’ve used magic erasers before and have found them to be very effective. Next, try sugar soap. Depending on how well the walls come up after us ...

Products like Drano are great if the blockage is a light build-up which can be dissolved. If the blockage is more substantial and has built up over t ...

One common part to check is the flat circular washer that seals the inlet water off. It is activated when the float lifts, and leaking can mean that ...

For mould and mildew, scrub down the area with a minimum amount of hot soapy water to remove any excess build-up. These eraser pads can help get the ...