Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Butler's pantry makeover

Acewoodhome
Budding Contributor
Acewoodhome
Acewoodhome
Budding Contributor

A standard walk-in pantry was transformed into a stylish and practical butler’s pantry that’s easy to keep organised and tidy.

 

 

24.jpg

 

The project

 

We converted our builder-standard walk-in pantry into a stylish and functional butler's pantry.

 

We did all the work ourselves, from gutting out the original fittings to plastering and painting. My husband built the custom floor-to-ceiling open shelves using MDF, which we painted to match the Kaboodle kitchen cabinets.

 

17.jpg

 

22.jpg

 

25.jpg

 

We love how it looks and, more importantly, how the space works for us. Everything has a place now, which means it's always organised and tidy.

 

3.jpg

 

Materials

 

  • MDF standard panels 2400mm x 450mm x 16mm, cut down to 420mm for the shelf sides. Same panels used for the shelves

 

  • Pine for the base

 

  • Kaboodle cabinets – two door cupboard 600mm, three drawer cabinet and 200mm cupboard.

 

  • Raw MDF Kaboodle door fronts

 

  • Caesarstone benchtop 

 

  • Easycraft EasyVJ panels for the back wall 2420mm x 1200mm x 9mm

 

  • Dulux Natural White for the walls

 

  • Dulux Semi Gloss Beige Royal Quarter for the cabinets and shelves

 

Before and after

 

7.jpg

 

5.jpg

 

More inspiration for your kitchen

 

Find ideas for your space with our Top 10 most popular storage projects and Top 10 most popular kitchen projects.

 

Comments
rubytuesday1953
Established Contributor

@rubytuesday1953  Absolutely fantastic @Acewoodhome. We have an actual Butler's pantry that we want to redo and your project gives us great inspiration.

Did you double up the shelf sides and make the holes for the adjustable shelves into the MDF?

Did you put a narrow piece of wood down the front of the shelf units to cover up the joins?

MitchellMc
Bunnings Team Member
Bunnings Team Member

Hi @rubytuesday1953,

 

Hopefully, @Acewoodhome can get back to us on the exact method they used. You can also see additional images from this project in their Butler's pantry makeover discussion. Those images show that they used a single MDF divider unless another sheet was retrofitted later.

 

It does look like they've applied a thin piece of trim timber to finish the divider off and give the appearance of thicker timber. Something similar to this Porta 20 x 8mm 2.4m Tasmanian Oak Square Edge Coverstrap Moulding. You can see a shadow cast on the divider in the image I've included below. I can only imagine it's from a trim piece on the front.  

 

The pins on the shelf supports are only quite short, but @Acewoodhome might have offset their location slightly so that a single MDF sheet could accommodate them from both sides.

 

Please let us know if you have any other questions about this amazing transformation, and good luck with your own.

 

Mitchell

 

Trim.png

  

Acewoodhome
Budding Contributor

@rubytuesday1953 no we didn’t double up the mdf on the sides, just single sheet and we offset the holes on each side, so they wouldn’t interfere with the other side. We also cut down mdf to the size we wanted, to cap the front of the shelves, to give it a more finished look 

MitchellMc
Bunnings Team Member
Bunnings Team Member

Thanks for the clarification, @Acewoodhome. It's much appreciated, and I trust @rubytuesday1953 will now be heading in the right direction.

 

Mitchell

 

rubytuesday1953
Established Contributor

Thanks @Acewoodhome that's great. Your pantry makeover is exactly what we want to do with ours (only on a larger scale). We've been looking for ages to try and find the right configuration. And we love the door too. Can we rent your hubby to come and help us do it LOL 😂

buggles
New Contributor

@Acewoodhome 

This is so organised! Could you tell me where you bought the cane baskets and your labels, please?

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @buggles. It's sensational to have you join us, and many thanks for your questions about this fantastic project.

 

Let me mention @Acewoodhome, so they are alerted to your question about their project. We have a couple of woven baskets that you might be able to use: IconChef Hand Woven Bread Basket 24x14cm and Flexi Storage Clever Cube 330 x 330 x 360mm Insert - Natural Sea Grass

 

Do you have a pantry renovation in the works, or were you just looking to reorganise? Either way, I trust our helpful members would be more than happy to provide some solutions for you. Feel free to start a discussion if you need any assistance or if you ever have something to share. You'll find tonnes of inspiration within the community just like this project as our amazing members contribute their projects here every day.

 

Mitchell

 

Acewoodhome
Budding Contributor

@buggles the baskets are from Home Storage and Living. The labels are from The Pantry Label Shop

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects