Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Fireplace and feature wall

craftyhopper
Established Contributor
craftyhopper
craftyhopper
Established Contributor

A plain wall was transformed into an attractive and functional space with a wood heater, bookshelves and stone-clad feature wall.

 

 

fireplace.png

 

The project

 

This D.I.Y. project was not for the faint-hearted and needed more than just help from my husband. We did the work ourselves but had a plumber sign off on it, which included the flue installation.

 

I bought everything from Bunnings including:

 

  • Scandia wood heater and flue kit

 

  • Timber framing for the fire and bookshelves, and Pine to make the mantel shelf

 

  • Stone cladding which is an external cladding stone from the garden section

 

  • Tiles for the heath, which are 60 x 60 indoor floor tiles

 

  • Fire tool kit

 

I documented each stage of the build with photos. Here is how it went.

 

3aa.PNG

 

3aaa.jpg

 

3b.jpg

 

3c.jpg

 

3d.jpg

 

4.jpg

 

5.jpg

 

6.jpg

 

7.jpg

 

8.jpg

 

9.jpg

 

10.jpg

 

11.jpg

 

There were a couple of things that we came up against:

 

  • The most significant challenge came at the design stage. We had to use space from the room behind to house part of the flue. We had to protrude into the other room by about 250mm as I didn't want to compromise on how deep the shelves were or they would have been right up against the window.

 

  • Once we started demolishing the wall and ceiling, we noticed that a roof rafter went straight across where we needed to put the flue, so we had to split it. Luckily my husband is a carpenter and we have lots of builder friends so we knew what we could and couldn't do.

 

  • Once the fireplace was complete, we started the bookshelf using particle board. This was a mistake! The cut edges were really rough so I had to plaster them. It was ok once it was painted, but a lot more work went into it compared to the left bookshelf when we used MDF.

 

  • The wood heater was very heavy. I managed to help get it into the house, but we needed extra help to get it into position in the wall.

 

This project is my favourite renovation achievement. I love the result and it's a great feature.

 

Before and after

 

3.JPEG

 

fireplace.png

 

How to heat your home

 

Discover the best ways to keep your home cosy in How to heat your home.

Comments
Noyade
Valued Contributor

Very, very impressive! 👍

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects