Topics with Label: Organising

Hi, I was planning to install a shoe rack which required drilling 4 holes into the wall. I was installing this in the laundry area of the house. I p ...

Good morning, I am thinking DIY for the existing shelves with a covered door. Can I get suggestions on how I can make it happen? Shelves are made up ...

I built my first Kaboodle cabinet - a 3 drawer unit. Bottom drawer I used push to open runners - they work. Top two drawers are soft close but they ne ...

Hi, I'm currently renting and although I have alot of storage space in the laundry, I don't have a bench. I'm wanting to create a bench top over the w ...

hello    I was wondering if you would please be able to help with a layout design plan to renovate our laundry. Ideally would love to add a shower in ...

Walking around the store I happen to come across 2250 x 600mm 30mm Plywood Pine BC and realized that this would make a perfect laundry table. In order ...

Hi there I'm looking for some advice. My laundry is a bit of a nightmare and I feel limited in what I can do as the washing machine taps are on the o ...

  Hi there, Would anyone have an idea on rough coasts on renovating this little area to have more modern vanity (would probably need to go floor up v ...

I am wanting to renovate my laundry as I have no real storage. I do have a top loader washing machine.        

Hi Everyone Newest member here and needing some help on storage and layout ideas as looking to DIY the laundry and shower. Laund ...

  Would this be possible, looks like I need to remove the trim around the old cupboard. Any advise would be appreciated.

The hooks attached to the back of the cabinet do not extend out far enough to be able to hook onto the wall brackets. The cabinet has an edge around i ...

Hey all Love the forum and keen to get some ideas from the group This is our little laundry space and keen to hear ideas about how we can remodel ...

This is my super tiny laundry room with just a washer and no dryer. Bought a stainless steel cloth hanging rack. Could only find 1 stud along this ...