Topics with Label: Craft and Hobbies

Following on from my first attempt at some ocean wall art with the Wooden Whale Shark (find at https://www.workshop.bunnings.com.au/t5/Whole-of-House/ ...

Hi Bunnings team, I am hoping to DIY my own circular vanity table, and have found an online guide that involved making one out of a large cardboard ...

Hi All. I'd like to build my own wooden pull up bar along the lines of what's in the picture. Rough specs are: Bar width: 82 cmDistance of the rod fro ...

This cute little piece of wall art was made using timber off-cuts from different projects and a cartoon image of a whale shark. This is easy to replic ...

  hi, I bought this product a month, its basically a long piece of wood which I've been using for picture framing. It was recommended to me by a sta ...

Chez made this painting a while back and has suggested many times how good it would look with an old fence paling style frame. With Valentine’s Day ap ...

Want to hang a frame of 150cm x 150cm approximately 25-30KG heavy, it has 2 horizontal wooden bar (please refer photo). What would be the safest? Hang ...

This is a great way to hide those ugly food containers and allow your puppers to eat a comfortable height. With all materials easily sourced at Bunnin ...

Hello Workshoppers! I just bought the stand for my TV, and had this vision of adding wheels to the bottom of it. As there is no hole to screw in ...

Here in Minlaton, South Australia I design & build realistic Big Rig wooden models plus even draw up the woodworking plans for those who are intereste ...

Hi all. I purchased the Ozito airbrush and mini compressor kit (Mack 300) and I can't undo the air cap body and the valve body parts (see pic). The sp ...

Hi all, I was hoping for some tips on how to apply wood stain properly? I’m making a puzzle board and have applied 3 coats of Cabot’s water based inte ...

Hi everyone, looking for some advice on how to add a door to a dog kennel to be kept indoors and what equipment may be needed to help reduce sound f ...

This year my Christmas Tree started to collapse, despite my efforts I was not able to keep it together until Christmas day so I decided I would repurp ...

I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...