Looking for advice on how to repair old damage to my cork flooring caused from previous tenants moving appliances through and taking chunks out of it ...
Is it better to line the concrete steps first with screwed down ply and then glue the new wooden step to the ply? Or glue straight onto the concrete ...
Hi All,Just moved house and about to embark on a kitchen reno and need to sand, polish and the floor (see attached floor pic). The boards are red-brow ...
Removed carpet. Filled and sanded stairs. Painted treads with dark teal paint then put Cabot's clear urethane with hardener over the top. They came up ...
Hello Looking for some help on BAL (Bushfire Attack Level) 12.5. We are building a new home and would l want to build a timber deck area on the side o ...
Hi All,
We are in the middle of re tiling our house. We just finished removing the old tiles and now we were left with adhesive / mortar in most are ...
I have a multi speaker stereo system that is old - pre-wireless - but sitll in excellent condition.I want to be able get all the wires from the amplif ...
I am renovating my apartment and hoping to lay wooden floors. We have found an issue that we have metal door frames which are flush to the wall. Are t ...
1980's wooden stained spiral stairs need re-furbishing to cover water stains and scratches. At present a very well worn walnut colour - any suggestio ...
Hi, I have small tiling job coming up and need a little advice on adhesives. Please see the picture with tiles laid out on cement floor. Without adhes ...
Hi Workshop community, I’ve got a bit of a problem with some wooden floorboards that have had some damage over time from timber borers. The floors are ...
Hi All,Installing floating staircase and hope to stain treads and rails ourselves. Wood is Victorian Ash and Tasmanian Oak. Looking at a relatively ...
Hi ,mates.We have a small area (130*320cm)in our kitchen that has wooden floor.We've noticed that bits of its colour seem to be flaking away .(picture ...
So I'm renting a house with the (what I think is) laminate flooring. I put those felt pads on my bed to protect the floor but somehow they got flipped ...
I have moved into a "crummy" unit that is part of an old warehouse conversion. The concrete floor looks like it hasn't been touched at all - it's cove ...
I have rectified tiles throughout my house - on a lot of the grout lines, the tiler seems to have not used enough grout - and the grout is a couple mi ...
Here's a simple tip for a front door that jams just enough to be a nuisance, and stops the door from closing smoothly.
No need to take the door off ...