Going to renovating my kitchen but i would love to reused and keep the marble top that we have. The kitchen looks dark because of the dark cabinets an ...
Hello,
I have a cabinet and I want to hang on to it a spice holder.
The cabinet wall is 3 cm thick.
Not sure what kind of wood is the cabinet (but it ...
Hi guys.
Im looking at finally adding some shelving to our pantry.
We want floating shelves and want your advice on my plans - mainly on the framing ...
Hi, I've got some 450mm drawers in the kitchen that I really want to upgrade and reuse the drawer "face". My main annoyance with the existing one is t ...
We have imagined a great coffee bar station by reusing what was a ridiculously large pantry opposite our kitchen don't worry, there is another pantry ...
Hello,
I am building a Kaboodle kitchen in the thermoformed Cremesala colour with the country style profile. However, the pantry needs to be ripped ...
I currently have Hafele OSKA-FSC 450mm wide pull out waste bins under my sink , inside my hinge door cabinets.
I would like to attach the door to the ...
Since plastic bags have been withdrawn and because we don't yet have a bin for recycled food scraps, the problem for us here has been how do we get ri ...
Hi everyone,
I just added a shelf above our fridge for extra storage as below. I used a particleboard 16mm thick
The size of the shelf is 1167x700, ...
HI All, I am looking for suggestions on how to make a wine rack using reo steel reinforcing mesh. What should I look out for as top tips to make it st ...
I built this wine rack out of necessisity than need. I was replacing my existing fridge with a bigger one, so I had to remove the cabinet above the fr ...
Hi,
I purchased some Kaboodle Heritage profile 450mm doors to suit a Kaboodle 450mm pantry. The doors have 5 hinge holes that do not align with the 4 ...
Kitchen Renovation and addition of new Butler's pantry.
The project involved changing the old-style kitchen with dated cabinets and benchtop/splashb ...
As the years have passed and the original shelving gave way I knew the Coffee Station needed a glow up
It took a while to work out what profile we wou ...
Hi folks,
We are wanting to do some work on our kitchen. Following are the things we would like to do. This is going to be one at a time.
A. Changin ...
I have an L shaped pantry. It looks like the L is made of 2 separate pieces with a plastic piece joining it. And was strengthened by this vertical boa ...
We had a very tight, poorly designed and underutilised kitchen space even though the room for the kitchen was quite large. Our vibe was to incorporate ...
This was my old vintage dressing table. We revamped, up cycled & integrated it, into the bottom section. For the top part we used old pieces of wood, ...