Workshop
Ask a question

Topics with Label: Tools and Materials

Jeffersm963
Finding My Feet
1 reply

Hi, I will soon be having a new kitchen installed and in order to save on the budget, i will be doing the removal of the existing kitchen with my so ...

Easybuild
Community Newcomer
2 replies

Hello, We have a kaboodle 900mm rangehood cabinet that we need to fit a 600mm slideout ranghood into (Westinghouse WRR604SB). Is there an easy way t ...

Edgar
Growing in Experience
4 replies

  I am installing new Hevea benchtops over existing base cabinets. The installation instructions state the joiners should be used. However, will th ...

nicpat
Community Newcomer
1 reply

Can Bunnings cut laminate to fit like in picture? And do they have someone who can come and measure and install?  

vas90
Getting Established
1 reply

Hi, I tried painting over the peeling spots, but it did not offer adequate coverage.What is the best way to approach repairing this? Window Seal by ...

drewster72
Just Starting Out
4 replies

Hi, I am very new to doing this sort of thing. I am putting together a sort of kitchen island/peninsula. I have an appropriate sized piece of Kaboodl ...

Omphalie
Just Starting Out
3 replies

Hi, My water filter overflowed last night and water dribbled onto the kitchen floor all night without me noticing. I woke up in the morning to a few s ...

Robinord
Finding My Feet
9 replies

I bought this home not too long ago, I just noticed that the kitchen countertop right infront of my sink is expanding due to water leaking into the wo ...

SarahK1996
Cultivating a Following
4 replies

   My parents just did a renovation inside our holiday caravan using a Kaboodle kitchen and there is one drawer that keeps sliding out because our c ...

jamesvtre
Just Starting Out
1 reply

I want to grout with a black grout. What black grout product would be ideal for this tile? Would this product be suitable https://www.bunnings.com. ...

tarra
Just Starting Out
1 reply

I want to replace the wooden benchtop of two cabinets in my kitchen. They are separate (not connected). I would like to buy wood from bunnings and i k ...

oliviapatch
Finding My Feet
4 replies

Hey Everyone, My kitchen tiles have already been painted a horrible green colour. I am wondering if it’s possible to paint over the paint in a white ...

Edgar
Growing in Experience
10 replies

I am replacing my kitchen benches with Kaboodle 2400 x 600 x 36mm Hevea Timber Benchtops. I will need to cut it to size myself as the lead time for sp ...

alex23
Just Starting Out
1 reply

The laminated kitchen benchtop has partly burnt as a result of placing a hot pan onto it. Could you please provide any suggestion on h ...

jordanperret
Growing in Experience
8 replies

georgia2
Just Starting Out
1 reply

  Hi, just wondering could I seal and tile the shower wall recess shelf and use it as a basin? I’d obviously need to add the plug hole but wondering ...

Rozee
Just Starting Out
1 reply

Please advise the measurement from the edge of cupboard door, for corner cabinet hinge - W-50350,using Kreg concealed hinge jig, for non Kaboodle door ...

Renowayoflife
Becoming a Leader
5 replies

We started renovating our home 2 years ago, and as most of you can probably appreciate, when you’re doing most of the work yourselves, then, things mo ...

laurenlowe
Just Starting Out
1 reply

I laid some wet trousers on the dining table and it has stained the wood. How do I fix this please?  

lcam2094
Finding My Feet
2 replies

hi there we have existing bunnings timber bench tops which are pre-stained a dark colour. I would like to know if it’s possible to sand these back t ...

Wendy241
Just Starting Out
2 replies

Hi I would like some advice for a novice on a budget.. doing a house up to sell. I would like to update the beige and yellow tiled backsplash, prefe ...

Peterpiper
Finding My Feet
4 replies

Can I get some information on how to remove this drawer? It is not the standard drawer runner as my other Kaboodle kitchen drawers.

alexk
Just Starting Out
3 replies

 I have a slow drip from my PYRAMIS kitchen tap. How do you know which is the correct washer/cartridge to use. Is there a special tool to use to unsc ...

margoburl
Finding My Feet
3 replies

Hi. The holes in the runners and the holes in the cabinet do not align. Do I use the pre drilled home nearest the front of the cabinet to locate th ...