Bought replacement gas bottle today from Bunnings connected to barbie via safety gauge. Used for a few hours then turned gas off at bottle found gas ...
Hi everyone
I just wanted to share our outdoor renovation project my husband and I completed recently. We mostly used products from Bunnings of co ...
G'day DIYers. Thought I'd share with you the biggest DIY project I've ever attempted. We're basically extending our alfresco area to include an awning ...
Hey all! It's been a while!
I want to hear what everyone's favourite things to cook on the rotisserie are? We've been using the small Jumbuck rotis ...
Long time follower, first time poster. I would like to share my little iso project we started on Saturday (12/09/2020). The objective was to bring a ...
Hey all, needed to share these highlights from the weekend. I was lucky enough to be representing Heat Beads at Meatstock Melbourne over the weekend. ...
The Barby is in an enclosed area.I decided to make a hinged wall adjacent to it for fume removal, light, ventilation and some atmosphere. In storms I ...
This may sound like a dumb question but I recently purchased an Alfresco plus Bbq Module for my Matador Edge Built in BBQ This is the one I purchased ...
The perfect way to serve those little titbits to your friends over summer inside or out.
I’ve used untreated pine boards from Bunnings and in partic ...
Hi there,
I'm looking for some advice around low profile decks - I'm tossing up doing a floating deck to extend my outdoor room to the fence to put ...
All materials are recycled and Have been made into this large outdoor bench seat measuring at 2.3m long, 750mm high, 800mmm wide with the choice of a ...
Hey all,
I'm busy planning my deck and pergola. This is what I'm thinking at the moment.
I thought the 3 layer deck would be nice (total deck length ...
I have a built in bbq recess on an outdoor bench
i bought a replacement bbq however it doesn’t fit I need to reduce the width of each the two timber v ...
Hey All.
This is actually a project I made a few years ago and sold when I moved to a flat at the time. But I thought I'd share it for some inspirat ...
This is a photo of a cocktail trolley I made for some friends. This one is made of recycled treated pine for the frame and recycled Baltic pine for th ...