The Bunnings Workshop community can help with your home improvement projects.
A Pine timber pergola installed over a garden courtyard.
This project was to build and install a pergola by attaching it to the existing fence uprights and the fascia (through to the roof rafters) of the house.
Materials used in the project:
Tools used in the project:
Design ideas (not final).
I had to figure out how to extend the uprights of the fence. This took some creativity but I worked out something in the end.
I also installed the barge board going through the existing fascia to fix it to the rafters.
The next step was cutting the timber to size using a mitre saw and jigsaw to allow clearance for the gutter.
Next was installing the joist hangers after painting the barge board.
I then did a dry fit to see if all my measurements were good and the whole pergola was level.
I then trimmed off some of the timber and painted all the joists.
Bunnings has a series of videos about how to build a pergola, which includes building the pergola frame and constructing the roof.
Workshop member Shay used Jarrah to build his pergola for outdoor entertaining.
Community member Jimi built his customised pergola for alfresco area using a Softwoods pergola kit.
For more inspiration from our Workshop community members, check out our Top 10 most popular pergola projects.
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects