Hello there,
I'm looking to build a gate as part of a project, so I am looking at gate frames. Just in planning stages currently, but I was looking at https://www.bunnings.com.au/pfeiffer-1280mm-x-600-1000mm-adjusta-gate_p0120020. It is a full kit? Does it come with everything needed to install into posts? Or does it require other bits to install?
TYIA
Denis
Hi @denisl,
That frame kit includes the hinge hardware. So, you'd just need fixings suitable for the posts you'll install, whether that be self-taping screws for steel or coach screws for timber posts. You'll then need additional fixings for your timber slats.
Please let me know if you have any questions.
Mitchell
Thanks very much @MitchellMc ,
picked up 4 x https://www.bunnings.com.au/zenith-m8-x-75mm-hot-dipped-galvanised-hex-head-coach-screw_p2449307 today for a 100x100 timber post.
Cheers,
Heya guys,
I am now at the installation stage and wanted to ask another question. So I have a couple of fence gates around my property that I was hoping to use for reference on how to do this one, but the hinge on them (more of this style: https://www.bunnings.com.au/pinnacle-16mm-galvanised-lh-double-butt-security-gate-hinge_p4150137) seems to be a bit different to the hinge that come with the Pfeiffer gate:
The question I have is do I install these hinges on the inside of my hardwood posts? Or the front? Ie:
I am using this latch: https://www.bunnings.com.au/gater-adjustable-gate-latch_p4150004?store=8161
I want to make sure that when the gate is closed, the latch actually lines up and works. I also want to make sure that when the gate is closed, the gate looks square to the posts.
I am using 75mm timber palings for cladding if that makes any difference.
I am open to purchasing a different set of hinges if that makes it better.
THANK YOU IN ADVANCE!!
It really comes down to how much space you have between your posts. Typically, you would install this type of hinge on the inside of the post as opposed to the front as this will give the gate the cleanest look. As these are adjustable gates, you can adjust the width up and down so that they suit the opening perfectly.
I'd suggest installing the hinge on the front edge of the inside face of the post and to install the latch after the gate is in position. This will allow you to ensure the latch lines up perfectly without any guess work.
Let me know what you think and if you have any further questions, please don't hesitate to ask.
Jacob
Thanks @JacobZ ,
That's exactly the information I was looking for. I will give it a shot and report back.
Warm Regards,
No worries, keep us posted if you run into any issues. More than happy to help further if required.
How do you install the top hinge? The bottom one is fine; that can be installed without the gate. But if you install the top hinge before fitting the gate the gate won't go on because the hinge goes down into the top of the gate. And if you install it after you can get a screwdriver bit in there to screw it in.
I've also tried to fit it beforehand by almost fully tightening it and sliding it down onto the gate. But then the screwdriver bit is at an angle and won't screw. I've tried to get an Allen key in there too... no luck.
Hello @Lex2
Welcome to the Bunnings Workshop community. It's sensational to have you join us.
Please allow us to double check with our supplier on the proper method of installation. As soon as we have more information, we'll get back to you.
Thank you for your patience.
Eric
Hi @Lex2,
In step 3 of the installation instructions on the packaging it says - "Use hex head fixings to allow for tightening from the side."
I would suggest using hex head screws to fix the hinges in place. They will allow you to make the tighten them from the side with a spanner or socket set depending on the clearance.
Let me know if you have any further questions.
Hello Team
I am new to DIY projects. So my questions might sound little bit stupid, please don't mind.
I have a horizontal slats fence door which needs some solid backing. So I was thinking of attaching the adjusta -gate frame.
Now, I want to know how can I fasten the steel tube to the timber slats. Should I need to fasten from timber to metal or metal to timber, does that need pre-drill into the steel tube? I mean I want to know about the tools and materials required - type of drill bits, screws and everything else required.
Can someone please help me?
Regards
Hello @kanwalr
If you are using the Adjusta-gate frame as a backing frame, please make sure that the slats are strong enough to hold the steel frame up. The gate frame is usually attached to a post and then the cover is attached to the frame. Attaching the frame to the timber slats or vice versa can both be accomplished. What is important is that the frame is held in place with https://www.bunnings.com.au/craftright-300mm-2-piece-quick-action-clamp_p5860150 to prevent movement.
Pre-drilling the slats and the metal frame will make it easier to attach the https://www.bunnings.com.au/buildex-14g-x-25mm-class-3-galvanised-shed-teks-screws-with-seal-50-pack_p0920197 . Please check the length of the screw against your slats to make sure you get the correct length. I suggest using coach screws to anchor the frame to your post if you are planning to mount the frame. When purchasing drill bits make sure that it is rated for steel as indicated on the packaging. A set such as the https://www.bunnings.com.au/ryobi-19-piece-metric-high-speed-steel-drill-bit-set_p0056805 is a good example of a multi-tasking drill bit as it will work on wood and PVC as well.
Here is a handy step-by-step guide: How To Install Fence Palings (some of the techniques used are applicable to your project)
Please remember to wear personal protection such as gloves, goggles and a mask.
If you need further assistance, please let us know.
Hi @kanwalr,
Just curious whether you ended up moving forward with attaching the Adjusta-gate frame to the timber slats.
There were quite a few components and steps involved for a first DIY project, so I’d be interested to hear how you found the process and whether you managed to get everything lined up and secured properly.
If you’re still working through it or need a hand with any part of the install, feel free to ask. We’d also love to see how it turned out if you’ve made some progress with it.
