Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Low level deck

Harv
Building a Reputation

Low level deck

Lowleveldeck.jpg

I am building a low level deck and I’m restricted with height.

 

I’m using 140x45 H3 treated pine bearers.

 

I put my posts in at 1.8mt spacings. The deck is 7m x3.6m with flush joists and centre bearer. Now I’m not sure if my stumps are too far apart for that size timber.

 

Harv
Building a Reputation

Re: Low level Deck

8336BB2F-969E-4D7F-84B8-B9A1EE6E34AA.jpeg0F00CB7D-38B8-4B45-883F-0EEA0327AD68.jpeg31162385-1E13-441B-B8BD-986B97180EFC.jpeg6B114363-22C2-4D5E-8EC2-AD99E087AB5F.jpeg

Harv
Building a Reputation

Re: Low level Deck

I added some pics of my deck in progress hope it helps others with a few ideas or improvements I could make for next time

Thanks

Harv

Jason
Community Manager
Community Manager

Re: Low level Deck

Great, thanks for sharing @Harv. Looking forward to the next update.

 

Jason

See something interesting? Give it the thumbs up!
BIM_Engineer
Former Community Member

Re: Low level Deck

Hi @Gezza87 & @raymao268
I've put up some more information regarding  Stump sizes and Deck Plan/Model here

DIY Timber Deck hth

 

Gezza87
Cultivating a Following

Re: Low level Deck

Hi thanks @BIM_Engineer that is awesome and very usefull when i finally get around to my decking i will definatly be using that as a guide. Thanks

Re: Low level Deck

Hi guys

I'm curious as to how deep in the ground the posts should be and how much concrete should be either side of the post itself. I'm rebuilding a deck that was once around a swimming pool. Deck is approx 8 inches above ground

AEBD16FD-3FF5-4387-AED6-084547A2F89E.jpeg

 

Jason
Community Manager
Community Manager

Re: Low level Deck

Hi @Johnny,

 

Welcome to Workshop and thanks for joining in the discussion. I hope our members provide lots of useful advice and inspiration for your projects.

 

Let me tag @BIM_Engineer for you so he is alerted to your question about your deck construction.

 

Thanks,

 

Jason

 

See something interesting? Give it the thumbs up!
BIM_Engineer
Former Community Member

Re: Low level Deck

Hi @Johnny
Thanks for the photo
Try attaching Stirrups direcly to the Bearers

cast into Concrete   pad hth

Engineering Decking Stirrup.jpg

Re: Low level Deck

@Jason Thanks very much mate

@BIM_Engineer thanks for the advice, much appreciated. As I haven’t done any concreting like this before can I go one further and ask the approx depth and width of the pad? Also, the positioning of this particular stump as you can see from the pic will be where the pool used to be until recently. The soul was compacted but I’m wondering if a deeper hole/concrete will be needed for the bearer support pad as soil may not be as firm due to only recently being put in?

Also, what is the best concrete to use as the pad?

sorry, hopefully that all makes sense

BIM_Engineer
Former Community Member

Re: Low level Deck

@Johnny

Notes to pad footings sketch
250-300 Diam Depth generally
Those brackets connections can be offset to the bearers
The soil needs to be compact beneath the footings or dug into natural soil
..dig the footings a little deeper
Get the ready mixed bags of concrete...just add water and mix

Check Out The Videos here

DIY Decking for tips..hth

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects