Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Get started

Whole of House

Help for projects that encompass the entire house

Browse by topic:

All

Latest

Growing in Experience

6 replies

Hi, I want to build a shelf in the gap between a built-in closet and the door of a room. The shelf itself is a piece of 17mm plywood. One of the sides ...

Finding My Feet

4 replies

Hi, I've just installed this instrument holder but the screws are spinning around and not fully tightening. Here is what I did: Used a stud finder t ...

Growing in Experience

6 replies

How do I snake-proof my house including back yard and frontyard

Having an Impact

2 replies

This fantastic, fold up puzzle table was a very special request from a loved one. Complete with a tilt-able top, four sorting draws, wheels for easy t ...

Just Starting Out

1 reply

Hardie installation guidelines recommends laying Villaboard sheet horizontally. Why not fix them vertically and have all joints between sheets fall on ...

Building a Reputation

13 replies

I noticed that my ceiling has shadow lines and when inspecting from inside my roof cavity there are areas of my ceiling that have detached from the ce ...

Just Starting Out

1 reply

Hello, I’m renovating my first home and have removed some old panelling from above my front door (internal). I think the gap was there previously ...

Having an Impact

7 replies

Before we bought the house an extension was added. However, the 2 floor levels dont match. We have since removed some old timber at the join of the 2 ...

Cultivating a Following

6 replies

Hi there,I'm looking for advice on how I can fix my roof gutter. Looks like the strong winds have damaged the gutter. I managed to push the gutter in ...

Growing in Experience

2 replies

The Lockwood Lock that has Legge and 990MF on the outside no longer locks via key or by the turn latch. It was starting to stick a few weeks ago then ...

Just Starting Out

1 reply

Installed Siniat ceiling system but plasterer has requested a modification that requires 2 lengths of furring channel to be joined. I have not found j ...

Just Starting Out

4 replies

Hi all! I've learned so much from the insight of you all over the years, and I'd be grateful for the community's thoughts on a small situation we're ...