Topics with Label: Repairing

               I’ve got a late 1960s high set house, so the slab doesn’t have positive side waterproofing (pretty sure the original owners so ...

Hi everyone, I would like to rerender the top of an internal garage wall that has suffered some moisture damage. I have a small tub of the origina ...

       Hi gang, I’m looking to modernise my garage (epoxied the floor and sprayed it already). I’m pretty handy but I’ve not replaced a window b ...

Morning. I have an ant nest (I think) between car port and veranda. Should I disturb the next before I treat? What can I purchase at Bunnings to help ...

We have an old shed that we would like to tidy up for a bit of a hobby space. There is a significant crack in the concrete, approximately 20m wide. I ...

My shed has been converted to a granny flat. It smelled strongly of damp, so I pulled up the floating floorboards today to find a wet concrete slab wi ...

Hi everyone, Ok this might be a bit of a tough job but here goes. We have two sheds and the property we're located on is on quite a slope. The iss ...

We are trying to get to the windows behind this very thick cork board - Why the previous owners did this lord knows, We have found that the window is ...

Hi, I have moved to a new house and it seems there are quite a few things to fix here, and the community has been super helpful in helping me gettin ...

I have this garden shed done by previous owners. As you can see, there are gaps where the panels meets the base and water gets through the gap inside ...

I have the below whipper snipper https://www.bunnings.com.au/ozito-pxc-36v-2-x-18v-300mm-cordless-line-trimmer-kit-pxcltk-2182e_p0082358 Starting ...

I have a zincalume garden shed that the previous owner had put mulch against resulting in rust and some holes at the bottom of one wall. I went to a B ...

For visual effect, I have decided to board over the bottom half on my paint damaged garage internal wall with shiplap. We have had damp problems mores ...

Hi all, I've recently moved into a new (not to be confused with newly constructed) property, and things aren't going well. There are a heap of issue ...

Help. We cant get the remote to conect. we do not know what is the 'learn' button. Has not had a remote in years Sometime after  Pressin white then y ...