Hello everyone.
Title says it all. I have a Bosch POF 1200 AE plunge router but want to have the ability to setup a portable router table and the Oz ...
So we have moved to a property with a steel shed, 6m x 6m with a high gable roof and 2 roller doors. Concrete floor. I want to use the space for my cr ...
Ryobi 65kg Hydraulic Door Closer will not open door 90 degrees when installed as per instructions
Closer installed as per these instructionsCloser i ...
Hello Bunnings.
What are the fasteners called - with the telescoping thread?
Allen key ends?
I'm looking to join two 18mm pieces of wood together.
Che ...
I have a large garden shed that needs a roof vent. I purchased a bastion roof vent https://www.bunnings.com.au/bastion-300mm-aluminium-mill-roof-vent ...
Hi I’m new to the community. We have two windows in our garage that are not in a great place. We are wondering if we can fill them in without having t ...
Can someone please recommend a colorbond safe rust converter? There is some swarf in an area I can't get to so want to spray some rust converter there ...
Hi all
Im shortly starting a shed from scratch, 3.6 x 2.4, skillion roof. The book im using is by an english author, called "How to build a shed" In ...
Hi, now I'm planning to build a 3m×3m shelter for my goats, in Fairlie.
I and my two goats are moving to there end of this month, and I only got 2days ...
Can you advise which products I should use to safely anchor a Rack-It 1000KG & PRO open shelving system to a masonry brick wall in a garage? The produ ...
I have a timber shed. It is set on a concrete base with drains around it. The East side of the walls and doors are starting to deteriorate due to bein ...
Many Bunnings stores offer a timber cutting service to help you get your wood home and get started on your project.
Here are some frequently asked q ...
Hi
What would be a good cost effective workshop bench top? One that can be sacrificed and replaced. When replaced one that can be easily recycled. I ...
I have acquired once of these old drills from a house clearance. The instruction manual does not advise if the charging stand LEDs indicate when the ...
I just got given the Ryobi RCS1500-G Circular saw and I can't, for the life of me, get the hexbolt off to attach the blade.
The instructions have no ...
Morning. I have an ant nest (I think) between car port and veranda. Should I disturb the next before I treat? What can I purchase at Bunnings to help ...
We have an old shed that we would like to tidy up for a bit of a hobby space. There is a significant crack in the concrete, approximately 20m wide.
I ...
My shed has been converted to a granny flat. It smelled strongly of damp, so I pulled up the floating floorboards today to find a wet concrete slab wi ...
Hi, I have just today finished using the dymark epoxy kit for my garage floor and I’m very happy with the results!
I now want to use a sealer/clear ...