Workshop
Ask a question

Topics with Label: Doors and Windows

VNylen
Community Newcomer
3 replies

Hi, I've been having an office built out the back and it's ready to have the archs and skirts installed. My plan was to learn how to do this myself a ...

Samara1
Getting Established
7 replies

First time building in NSW. Will these small gaps around windows outside be filled with silicon as standard?

KTC
Just Starting Out
1 reply

Hello, I’m wanting to fix some window architraves which have been ruined by weather over time. As you can see in the photo, it’s the inner part that n ...

badmojo
Getting Established
7 replies

Hi Bunnings Workshop Team, I want to install a smart door lock. What is the appropriate lock for below?  

NibzAU
Just Starting Out
1 reply

Top hinge of our front door screen door came off. I went to bunnings and was advised i could try some glue and nails and toothpicks I got some liqui ...

katelyn
Just Starting Out
1 reply

I’m wanting to replace all the internal doors in my house. My house is old so I’m needing 810x2020 if I purchase the Hume 2040x820 am I able to take 5 ...

raymond1874
Just Starting Out
1 reply

My door size is 2030x745 Can I buy 2040x770 solid door to trim down to that?

Samara1
Getting Established
3 replies

What is the preferred insulation/filler for gaps in window frames on the inside & also outside? Is it required ?Builder told will cover this gap with ...

annaluno
Getting Established
2 replies

Hello, I'm helping my sister out as she would like to remove the whole door frame and door etc and keep it as a wall for more space inside for her l ...

NewbieDIYer
Just Starting Out
5 replies

What can I use to fill the gap between the sliding door and floor?  

KarenMM
Just Starting Out
3 replies

A couple of window sills in my home are very weathered from sun damage and in a bad state with cracks in the wood. The sills are not rotten (yet) and ...

Matt_R
Just Starting Out
1 reply

Hi I am wondering what is the best way to fill a palm sized hole in an internal wooden door? Would you use a foam filler with putty over it? Or shou ...

Dom123
Just Starting Out
1 reply

Hi. I want to build a right hand opening internal door. I guess a pre hung door system would be easiest. The problem is that the Bunnings online shop ...

1250
Finding My Feet
10 replies

My front door does not fit tight to the frame therefore allowing a draught to come into the house. The space is around the entire door including the b ...

guyrat7
Finding My Feet
2 replies

Hi, we have these old aluminium windows. I want to replace the old window in the kitchen with a new. The counter top tiles are installed against the r ...

Shane
Having an Impact
18 replies

I have old steel frame windows at the front of my brick house and all of the substance that is I assume supposed to be holding the window glass in and ...

JoeAzza
Kind of a Big Deal
1 reply

Just upgraded a standard sliding door lock to a deadlock one. The original holes on the were too far away to allow latching securely, I had to elongat ...

elbow
Growing in Experience
23 replies

hey guys - i've been here asking a few related questions and some of the helpful answers are now leading me to this question. I had new PVC windows fi ...

projectmumdanni
Making a Splash
14 replies

 today I unscrewed screen door and painted trim and spraypainted screen door .. need a bit of a touch up .. saving money and not adding to environmen ...

Newyork77
Just Starting Out
2 replies

So I have two issues I have a metal door frame which the screws / maybe rivets have broken off and I need to refix the hinge. And secondly the leading ...

tmoyn
Growing in Experience
1 reply

Hi, Sorry if this has already been answered before. We recently had a new door and frame installed and I need to stain it. I want to have a clear ...

quiney
Just Starting Out
4 replies

Hi I’ve got the Ikonic Passage Set and I’m having trouble as one of the knobs doesn’t have the release hole so I can’t get the knob off to screw in ...

DeidraYoung
Just Starting Out
2 replies

I have a question about how to select a stain for both exterior and interior doors which are Meranti. I wanted the finished colour to be Rose Mahogan ...

colinweiren
Getting Established
3 replies

Hi guys Just wondering how to remove patina rust from copper / brass door handles without removing them? ( please see the attached photos) Also wh ...