Topics with Label: Furniture

Hi There, I am using 190x190x390 cinder blocks to build a bench seat that will be topped off with inset 18mm ply and a piece of custom foam. I am onl ...

Hi, I purchased this couch on marketplace and it is as cracked and weathered in places. To refinish it I know it needs to be sanded but should we tak ...

 Hi, I am looking to see which oil would suit to oil the outdoor furniture in the photo? (furniture has faded a little since photo) Is teak oil suitab ...

Hi I'm a software engineer that sits in a chair all day, every day, for the last 20+ years, so no expert with tools or related stuff Anyhow, I decide ...

  Hi, I’ve just bought this Mimosa Coffee table with a FSC eucalyptus table top. Should I seal it with something to protect it from getting mouldy/da ...

Hi Brains Trust I'd like to upcycle this outdoor bench with paint. Is there a specific paint that's best for this? Could I use Rust-oleum Chalked pain ...

A pool blanket really works and helps keep the water clean and also warmer for longer which saves us having to turn the pool heater on. This is where ...

  I built this planter box with an incorporated seat and privacy screen - in only 10 hours with treated pine decking, lumber and hardware from Bunn ...

I have 6 outdoor chairs which despite being marketed as uv resistant (and quite expensive) have deteriorated to the point that they are shedding tiny ...

Hi brain trust , First time attempting this, I aim to construct a circular bench for seating around a firepit. The ground base consists solely o ...

Hey team About to look at oiling my deck and furniture. I've noticed the sleepers around my deck which I didn't oil last year and my furniture th ...

Hi Community! Hope all is well. This may be a simple question but I am new to fixing things myself (learning alot here). I have a damaged wood ...

I have wanted a replacement for my old timber sunlounge. It had been too many years in the sun and one day when I dropped myself on the timber frame I ...

I have a Teak outdoor table which is showing signs of water damage, I am thinking that I need to use a product like this to protect it: https://www.bu ...

      Surface on left is sanded back and plank on right is current untreated not sanded surface. Hi everyone,First time here and looking for s ...

Hi, I have two Marquee Umbrellas. One I purchased last year and the other just before Christmas 2013. As we live in an apartment we need a tilt umb ...

When i built the deck 12 years ago I wanted to install a bench here using the part ledge. Life takes over and it never started. Well Its restarted and ...