I couldn’t get a Caterpillar sticker, or even a Karcher, or de Walt sticker to go on this some have left it plain.
I’ll send you dimensions if you wan ...
A lovely. onar h for the side of the house or fence …. Remember when Gran had one ???
I collected the plans for these from a gardening magazine and ...
all mdf for inside of treated ply for out side . This one mad from scraps of 18mm mdf
plans available off the internet message me and I will send y ...
This year I felt that I needed to go to more effort for ANZAC day. So I’ve enlarged an image I found and using some 12 mm non structural ply 1/4 sheet ...
I’ve made two of these one I left bare treated pine and this one that I wanted to tart up a bit. The wheels are made by using the two biggest hole saw ...
How clever, I can’t tell you the frustration anger and broken finger nails I have because of not being able to find the end of any tape. I think you j ...
All materials are recycled and Have been made into this large outdoor bench seat measuring at 2.3m long, 750mm high, 800mmm wide with the choice of a ...
Hey guys, thought I would share the project I completed last weekend for my daughter. We followed the Bunnings mud kitchen video step by step and t ...
I thought I would share a pallet coffee table I built over my weekend. I used a very similar process to the D.I.Y. article How to build a simple co ...
I couldn’t get a Caterpillar sticker, or even a Karcher, or de Walt sticker to go on this some have left it plain.
I’ll send you dimensions if you wan ...
A lovely. onar h for the side of the house or fence …. Remember when Gran had one ???
I collected the plans for these from a gardening magazine and ...
all mdf for inside of treated ply for out side . This one mad from scraps of 18mm mdf
plans available off the internet message me and I will send y ...
This year I felt that I needed to go to more effort for ANZAC day. So I’ve enlarged an image I found and using some 12 mm non structural ply 1/4 sheet ...
I’ve made two of these one I left bare treated pine and this one that I wanted to tart up a bit. The wheels are made by using the two biggest hole saw ...
