Bubbles8712

Ask a question

since

a month ago

Cultivating a Following

Total posts 14
Total likes 22
Joined 03 October 2021

My latest posts
Posts I liked
My liked posts

Cultivating a Following

2 replies

Hi @Nailbag The Colorbond Trays you use, where do you purchase these from and are they custom made to size?Our deck is 3000mm wide so I could flush th ...

Cultivating a Following

Thanks for the tips, Eric. I like the idea of more air flow and the membrane coating.

Cultivating a Following

3 replies

Thanks for the insights, Jacob. Thanks for correcting my math - I’ll ensure there’s sufficient fall to avoid pooling. I had considered using tradition ...

Cultivating a Following

10 replies

We have a 5.0L X 3.0W X 1.7H deck which has an enclosed area underneath - except for the rain that comes from above! I want to waterproof u ...

Cultivating a Following

1 reply

We’ve bought a new fridge which “suggests” in its manual to have 50mm clearance on all sides to assist the hot air to dissipate. We only have 22mm on ...

Cultivating a Following

Agree with the smaller head plate - as long as it is solid timber, 18mm should be fine (though I’m not a carpenter!). We used five 14G x 85mm zenith s ...

Cultivating a Following

2 replies

Cultivating a Following

3 replies

Hi Splinters. As a result of using the 30mm header board, we have about a 60mm gap between the wall and door so the door doesn’t do much to reduce sou ...

Making a Splash

Hi @Bubbles8712 the trays were custom bent on site by a roofing plumber running into again a custom gutter tray. The trays themselves are not fixed to ...

Bunnings Team Member

Hello @Bubbles8712 Let me tag @Nailbag to make them aware of your questions. The tape you are referring to is called CAgroup 50mm x 20m Bearer Prot ...

Bunnings Team Member

1 reply

Hello @Bubbles8712 Just to add to the suggestions made, I also recommend using larger timber piece such as 70x35 H3 and coating its entire surface ...

Bunnings Team Member

Hi @Bubbles8712, If the air vent vents to another location other than the cavity, like the roof, it would allow some hot air to escape. However, you ...

Becoming a Leader

Hi @Bubbles8712 , Sounds like a pretty good plan! I'd screw and glue the pine and the MDF, that will increase strength. Go for it and share the ...

Bunnings Team Member

18 replies

Welcome to the Bunnings Workshop community @Bubbles8712. It's wonderful that you've joined us, and many thanks for your questions about barn door cons ...

Cultivating a Following

Thanks for the tips, Eric. I like the idea of more air flow and the membrane coating.

Cultivating a Following

3 replies

Hi Splinters. As a result of using the 30mm header board, we have about a 60mm gap between the wall and door so the door doesn’t do much to reduce sou ...

Cultivating a Following

1 reply

I used the 310 system with the 38mm screws (links below). It would have been quicker to have the more expensive Kreg system which allows you to make m ...

Cultivating a Following

10 replies

Success. We used five 14G x 85mm zenith screws to mount the 30mm thick timber header and then mounted the rail kit as per instructions and supplied ma ...

Cultivating a Following

12 replies

Project is coming along quite smoothly. After cutting the timber to size, I drilled pilot holes on each of the horizontal pieces using a Kreg pocket ...

Cultivating a Following

15 replies

We are FINALLY about to construct and install the barn doors. Slight change of plans re materials and design - we are now using 140mm X 12mm tongue an ...

Cultivating a Following

17 replies

Thanks Mitchell. I like your suggestion of rebating the brackets - we will see how it fits first and if we need to shave off a mm or so, so be it! Do ...

Cultivating a Following

23 replies

We are looking to build our own barn doors (2400H X 1200W) for 2 large openings in our living area. The design below is what we want to achieve. ...

Bubbles8712's Bookmarks

Go to Bunnings

Online Status	Offline
Date Last Visited	a month ago

Re: How to waterproof under deck?

Re: How to waterproof under deck?

Re: How to waterproof under deck?

How to waterproof under deck?

How to improve ventilation for fridge?

Re: D.I.Y. barn door

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

Re: How to waterproof under deck?

Re: How to waterproof under deck?

Re: How to waterproof under deck?

Re: How to improve ventilation for fridge?

Re: Will MDF be strong enough for our barn door?

Re: Advice DIY Barn Door

Re: How to waterproof under deck?

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

Re: Advice DIY Barn Door

D.I.Y. barn door

User's latest posts

Posts user liked

User's liked posts