Thankyou guys ,Thank you to all who comented and gave me help, it was invaluable. The frame is level now and secuerly bolted to the frame, my next doo ...
Thanks Eric & CoMy brother in law came over and helped weld some 50mm to make it level and now we have the A frame up now have to make it square again ...
Hi Brad,Yes you can choose the location for the door then cut the frame to fit it. I am hope full of my friend helping me get the roof frame fitted, I ...
Hi Mitchell, Eric & Brad,Is it critical that everything is 100% level the reason I ask is that the guy who did the slab didn't do it level and one sid ...
Not that's recommended by Rasmet @Martinb. You could possibly use some Concremate. Apply it liberally to the thread and a little to the hole's walls, ...
I would go with Concretemate. I interesting frame set up, I take it you can choose the location for the door and then cut the frame to fit? Going to b ...
It's great to hear you are making progress @Martinb.
Remove the loose Ankascrews, squirt a small amount of Ramset 300ml Chemset UltraFix Plus in the ...
Hi @Martinb
Thank you very much for the assembly update. I recommend doing a dry fit on one side to make sure that the panels line up so that you w ...
Thankyou guys ,Thank you to all who comented and gave me help, it was invaluable. The frame is level now and secuerly bolted to the frame, my next doo ...
Thanks Eric & CoMy brother in law came over and helped weld some 50mm to make it level and now we have the A frame up now have to make it square again ...
Hi Mitchell, Eric & Brad,Is it critical that everything is 100% level the reason I ask is that the guy who did the slab didn't do it level and one sid ...
Hi MitchellMc,My brother in law is going to give me some help but is pretty busy so I will just have to wait don't want to injure myself.Some of the h ...
Hi EricLI have both ratchets positioned about 30cm up from the slab and are both within about 20mm of each other. I checked to top cross poles and the ...