Hi @EricL, I have a similar situation here.I laminated two 4.2m, 140 x 45 members to create the bearer using a nail gun [75 x 3.06], but then I notice ...
Hi MitchellMc,I also need to resurface concrete stairs but this product seems not to be available anymore?Could you please recommend an alternative? T ...
Hi again, I'm close to start this project but I have another question related to the roof, which I decided will be detached, mostly because I don't wa ...
Thanks for the reply, Eric.I'll done some research, and after taking some more measurements, I've build two options for the upper deck. The main diffe ...
Hi Workshop Community.
I got a two-level deck + roof application council approved but I'm not sure how I'm going to build it.
The upper deck area cove ...
Hello @evisbal
Thanks for sharing your question about your timber bearer. The purpose of the CAgroup 50mm x 20m Bearer Protector G-Tape is to preve ...
Hi @evisbal,
Sika 310ml Grey Concrete Sikaflex Pro+ Polyurethane Sealant can be used to fill a variety of gaps between separate elements of your hom ...
Hello @evisbal
In regards to the bearer in yellow have you thought about using angle brackets to anchor it to the floor or perhaps use an anchor po ...
Hi @evisbal For the roof area, the posts that attach to the roof need to be secured with a stirrups concreted into the ground properly. The Existing ...
Hello @evisbal
Thanks for sharing your question about your two-level deck. It's great that you've received very good advice from @Itai. Just to add ...