Thanks for the reply Eric, I'll go with your suggestion.Re cutting the Edge Boards on the sides of the deck that slopes. These boards will need to hav ...
Thanks for the reply Jacob. Re the choice of saws this brings up 2 questions.1. Am i better off cutting each piece of decking board to length seperate ...
Hi Jacob Thanks for the reply. Im going to check out composite decking colours tomorrow. I beleive ican buy "nose boards" - same size as the decking b ...
Thanks for the reply Mitchell. I replaced the bricks with pavers (all but one, need to buy 2 more!) and have bolted the deck to the slab using 12 mm ...
Hi Jacob I assembled the frame and used the recommended adjustable feet. In the Bunnings video the guy places pavers under the supports to boost them ...
Thanks Jacob, I'll definitely use the joist tape. Since the last post i purchased 9 of the modular decking kits and assembled them - pic attached. I h ...
Many thanks Jacob, i'll follow your recommendations.Do you also recommend that i use this tape on the top surface of the base frame where it contacts ...
Thanks for the detailed reply Jacob, much appreciated Could you send me a link for suitabe screws to screw the frames together please. Would this ozit ...
Hi @martyjames
If you're not very familiar with a circular saw, then I would suggest using a mitre saw instead. Cutting the decking panels in a str ...