Child Item

Do you need to clean decking boards before sanding?

We are looking to refresh our two decking areas.

Looking to hire the orbital sander from bunnings then just finish with a suitable oil.

Will I need to chemically clean the boards prior to sanding, or can I just give it a hose off to get rid of any loose dirt etc then sand it?

Find more posts tagged with

Decking and Paving

Cleaning

Comments

MitchellMc

Hi @butters,

If the decking is heavily contaminated with organic material or dirt, it would be a good idea to clean it before sanding. If you don't, you'll spread the contaminants around and onto the freshly sanded timber. I suggest using some Cabot's Deck Clean and a stiff bristle broom.

Make sure to allow the deck to fully dry before sanding.

Here are a few step-by-step guides you should find helpful: How to clean a deck, How to sand a deck and How to oil your deck.

Please let me know if you have further questions.

Mitchell

butters

https://www.workshop.bunnings.com.au/discussion/comment/21748#Comment_21748

The deck is quite clean, not heavily soiled with dirt or anything. Looks like it just needs a sweep/hose down to get rid of some loose grass clippings and dog hair.

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/73599#Comment_73599

It sounds like you should be right to sand straight away, @butters. Still, let the deck dry fully if you hose it down.

Please take some before and after pictures for us. I trust our members would really appreciate checking out your results.

On a side note, does the deck need to be sanded? Has it greyed extensively, started to splinter, or are there raised fibres? I just wanted to ensure that you needed to sand and didn't think it was always compulsory before re-oiling.

Mitchell

butters

https://www.workshop.bunnings.com.au/discussion/comment/100252#Comment_100252

Was a new build, not sure what oil/stain was used previously.

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/116966#Comment_116966

It could definitely benefit from a sanding, @butters. 👍

After you have it all sorted, re-coating with your oil yearly is ideal. Or, in extreme circumstances, twice yearly. For a maintenance coat, it should only take 15 minutes to whip over the deck, saving you an incredible amount of work in the long run.

Mitchell

Child Item