Steps
Step 1
I started by removing all existing curtains and cushions. The canvas, walls and floors were washed with sugar soap and allowed to dry.
I lightly sanded all surfaces and painted with 2 coats of Dulux primer.
Step 2
Once the primer was dry, I painted the cupboards with 2 coats of interior paint and one coat of clear varnish in satin finish for extra protection. It was also at this stage that the fridge didn’t work so I removed it and made additional storage space with off cut ply I had.
I added some sheer curtains for privacy, upholstered the original seats and made new curtains to match the new decor.
The seat I painted in the colour monument.
Step 3
The only thing letting the makeover down was the interior canvas. I watered down exterior paint in white and applied it with this amazing little palm pad painter. Previously I tried with a paint brush and a roller but this pad was a game changer. It allowed me to have even paint and not too thick. If you use undiluted paint, the canvas will crack when folded away.
I sanded down the surface with 200grit after it had dried to remove any imperfections in the paint.
Step 4
I painted the flooring and bench tops with Laminate and tile paint.
Step 5
The other issue with the camper was that the fly screens were broken. My friend had purchased a roll of new fly screen which I started to sew by hand. This took so much time to complete one screen so I did some research and saw some people using a soldering iron to fuse the screen on. If you do decide to do this, i recommend a mask as the fumes are toxic.
I did however go back and sewed a running stitch after to fused them as I wasn’t 100% confident that this would be strong enough.
Like new!!
The exterior poles and trailer itself have been sprayed with Dulux metal shield in Monument and lighter colour in surf mist
After
Exterior before
Step 6
And that is my makeover complete. The camper is now out and about getting dirty and living it’s best new life
