Child Item

D.I.Y. floating study desk

We have just built our first home and we have two study nooks which need a couple of desks. We are hoping to have some floating desks built and ideally I would like to undertake this myself rather than paying someone.

Both spaces are identical, being 1350 wide, with ample space for a 600 deep table top.

Have been looking at pre fabricated table tops, possibly an OAK hardwood such as this https://www.bunnings.com.au/alpine-oak-600-x-2100mm-x-26mm-laminated-panel_p8330130, cut down to size. Off cuts could be used for some staggered floating shelves above the desks.

Interested to hear peoples thoughts and see any examples of similar projects.

Cheers

Find more posts tagged with

Furniture

Renovation

Building and Construction

Decorating

Comments

Jason

Sounds like a fantastic project @butters. Hopefully our members can share some similar projects with you, or make some helpful suggestions.

Let me extend a very warm welcome to the Workshop community. We're pleased you could join us and hope you get lots of useful advice and inspiration for your future projects from our community members. Feel free to post whenever you need help or have something to share.

Please let me know if you ever need help getting the most from the site, or have any feedback about how we can make Workshop more useful for you.

Thanks again,

Jason

@butters,

I should have also asked whether you have seen this project on the Bunnings website? - How to make a D.I.Y. timber floating wall desk

I will also embed the video below.

Hope it helps get you started.

Jason

ProjectPete

Those panels are great @butters - premade, look great, few different options, easy install.

I joined two of these panels for my laundry reno https://www.workshop.com.au/t5/Bathroom-and-Laundry/My-laundry-reno/m-p/4618 then used an off cut for a shelf between the two white cabinets.

Jason

https://www.workshop.bunnings.com.au/discussion/comment/4341#Comment_4341

Thanks for your input @ProjectPete.

@butters might also be interested in seeing your floating planter box - https://www.workshop.com.au/t5/Outdoor/Floating-planter-box/m-p/2267

Jason

ProjectPete

https://www.workshop.bunnings.com.au/discussion/comment/64314#Comment_64314

Cheers @Jason - that link didn't work because there's a 'space' on the end of it. This works though https://www.workshop.com.au/t5/Outdoor/Floating-planter-box/m-p/2267

Jason

https://www.workshop.bunnings.com.au/discussion/comment/94770#Comment_94770

Sorry about that @ProjectPete. Fixed now. Thanks for the heads-up.

Hope all is well with you. What are your plans for Easter?

Jason

https://www.workshop.bunnings.com.au/discussion/comment/94770#Comment_94770

Just wanted to add to this discussion that @ProjectPete has shared another floating desk project here - https://www.workshop.com.au/t5/Living-and-Bedroom/Floating-desk-brick-wall-install/m-p/23677

Jason

butters

https://www.workshop.bunnings.com.au/discussion/comment/114064#Comment_114064

So we finally took the plunge and tackled this project.

This was our first DIY project in our house, and we are happy with the result.

We picked up one of the benchtop panels from bunnings, some 30x40 timber, various screws and a few other bits and bobs to get the job done.

We added in a cable tray underneath to hide away most of the cables.

Our biggest issue we came across was drilling out the cable hole. The hole saw bits we bought we rubbish and didn't work, so we ended up just using a jigsaw and Dremel to tidy it up.

During the process we found our walls weren't square which added a few complications.

Eventually I want to add a draw underneath it, but for the time being this is what we ended up with.

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/125054#Comment_125054

Hi @butters.

That looks fantastic and also very functional! Can I ask what cable tray you used as that management looks very slick?

Thanks for sharing and excellent job on your first D.I.Y. project.

Mitchell

butters

https://www.workshop.bunnings.com.au/discussion/comment/132089#Comment_132089

For the cable tray we just used three different pieces of 1.2m long timber in various sizes. Then just screwed it all together, gave it some paint and fixed it to the frame.

Child Item