Child Item

Can I paint over my balcony tiles?

Hi Folks,

I live in an apartment that is full sun facing, but as you can see my outdoor balcony tiles are looking rather stained and dated. I was wondering if they can be painted over with a product that is fairly hard / long wearing and walked on?. Stained Stained Balcony Tile.jpg

What type of paint that could handle this, and does this need to be sealed?

Thank you.

Graham.

Find more posts tagged with

Tiling

Painting

Comments

Jewelleryrescue

Hi @Graham35

They look like a glazed tile so getting a paint it stick and be hard wearing might be a challenge but bear with me a second lets explore possibilities. Keep in mind grout line will be covered too.

Firstly a cleaning solution would be CLR a product to dissolve most water related stains and minerals. I would apply it and leave to soak an hour to minimise scrubbing. You will need to clean prior to painting anyhow for better results.

Paint will chip eventually but the toughest paint to use is epoxy paint highly resistant to abrasion and some specialised paints made for tiles.

One of the better sealer, stain blocker hard gripping under coats is

Zinsser 3.78L Bulls Eye Primer Undercoat Sealer And Stain Blocker I/N: 1570000 $94

Water-based, low odour primer-sealer
Seals stains, graffiti and tannin bleed
Mould and mildew resistant film
Rust inhibitive - great for new metal
Interior and exterior applications

Rust-Oleum Bulls Eye 1-2-3 is a water-based, whole-house primer, sealer and stain blocker for interior and exterior applications. Best for hiding painted surfaces; use Bulls Eye 1-2-3 to seal stains, graffiti and tannin bleed. With outstanding performance, this primer adheres to even glossy surfaces including tile and enamel trim.

Low odour and self-levelling, Bulls Eye 1-2-3 dries in 30 minutes and can be reapplied 1 hour after the initial coat. The breathable, flexible formula resists blistering and peeling for long-lasting durability.

After that The hunt is on for good epoxy paint I looked a some purpose made tile paints but they are usually pastol color ranges as they where made for bathrooms.

The other thing epoxy isnt 100% uv stable for outdoors.

So I am Thinking concrete paint solutions that will lend it self to adhere to Zinger undercoats Or maybe directly on the tiles Worth a ph call to Nutech and ask them re tiles?

So Consider Nutech Pavecoat a super hardwaring concrete sealer that is designed to withstand light vehicular traffic so pedestrian tfaffic is a breeze 29 Colours

nishes to meet the unique requirements of its customers.

Applications

PaveCoat concrete sealer is manufactured from acrylic polymer resin and is stabilised for all types of concrete, including:

Paving
Driveways
Factories
Workshop floors
Service Stations
Tilt slab construction
Asbestos and cement sheeting
Slate flooring
Concrete roof tiles.

PaveCoat clear and colours are recommended for:

Plain concrete
Pattern paving
Stamped impression paving
Stencil paving
Spray on finish paving.

PaveCoat is highly durable and resistant to oil and most chemicals.

For improved resistance to petrochemicals, refer to PaveCoat Petrol Resistant.

Features

Available in clear and 29 standard colours
Can be custom colour matched upon request
Excellent UV light resistance
Resistant to fading
Non-yellowing
Resistant to oil and grease

Graham35

https://www.workshop.bunnings.com.au/discussion/comment/33235#Comment_33235

Thank you very much for your feedback / advice. very much appreciated.

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/33235#Comment_33235

Welcome to the Bunnings Workshop community @Graham35. It's terrific to have you join us, and many thanks for your question about painting over exterior tiles.

I am unaware of any paint designed to go over an exterior tile. @Jewelleryrescue has helpfully provided a suggestion above, but please be advised that most exterior paver/concrete paints are designed to go over a porous surface, which a glazed tile is not. Adding a primer suitable for tile will give you a more suitable surface to paint over, but that would deviate from the concrete paint instructions and be considered an off-label use.

Have you attempted to clean these marks? I suspect they are tannin marks from leaves that have been dropped on the surface. If these marks haven't penetrated the tiles you might be able to remove them with 30 Seconds 5L Outdoor Cleaner With Power Sprayer and a stiff bristle broom. Do a test section in an inconspicuous location to ensure the cleaner does not damage your tiles. Remember to follow the PPE directions on the product.

Please let me know if you have any questions.

Mitchell

Graham35

https://www.workshop.bunnings.com.au/discussion/comment/78961#Comment_78961

Hi MitchellMc,

Thank you. Both my wife & myself did originally considered using CLR as the stains were very old rust stains.

What we are after is a complete balcony tile / grout change of colour being all the same colour without the hassle of pulling up the existing tiles or avoid laying new tiles / timber over the existing ones – a complete refresh change of colour if that is possible.?

Akanksha

Hello @Graham35,

Thanks for your question. It's been a busy time on the site and I'm sure @MitchellMc will be happy to keep assisting you as soon as he can.

Let me also call upon our helpful members @raceytrace, @RenoRach1 and @Chris_T to see if they have any thoughts.

Thanks for your patience in the meantime.

Akanksha

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/103777#Comment_103777

Hi @Graham35,

Unfortunately, glazed tiles are not porous, meaning paints find it exceptionally hard to bind to their surface. There are tile paints for internal tiles, but none that I am aware of for external use.

Mitchell

Child Item