How do I fill a hole in masonry?

elbow

Hey All

Just done some rewiring of the house and removed a lot of old fittings and wires but am left with big holes to fill. Both holes are 40-50mm deep - If you have any suggestions on how best to fill them i'm all ears but i am trying to avoid using any wood. Massive thanks in advance  😀🙏

JacobZ

Hi @elbow,

Thank you for your question.

I'll start by saying all concrete work should be conducted with the relevant personal protective equipment including gloves, mask and eye protection.

I would suggest using Concremate. It is a repair mortar with an expanding element to offset drying shrinkage and would be perfect for this application.

You should start by removing the old unused electrical boxes and cleaning the areas thoroughly, removing all loose material using a stiff bristled brush. Once clean, follow the manufacturer's instructions to mix the Concremate to a trowellable consistency, then apply to the holes using a trowel such as this Craftright 250mm Brick Trowel. Smooth overusing your trowel to a smooth finish then allow to dry fully before applying any paint or further coatings.

Let me know if you need any other assistance.

Jacob