D.I.Y. wooden clock using laser cutter

Super_D

I made this wooden clock from plans I downloaded from the internet. 
All the pieces are cut on my Co2 laser cutter, from 3ply from Bunnings
The body I had to cut by hand as it was too big for my laser bed.

    

It is made from 3ply Pine and Brass, the weight is about 5kg and 
is made from plumbing parts and lead. 
I used a Cedar stain for the body, and a clear coat on the rest of it.

I started it in September last year and worked on it when I could, mainly on Thursday.

It was a fun build and I am looking forward to the next one.

Materials

3Ply pine, brass rods and tube and lead, Sand paper, Cedar stain, and a clear coat

Tools

Co2 laser cutter
Scroll saw

Sand paper

Wood glue

Dave-1

Evening @Super_D 

ENVIOUS! 🙂 I have looked at these types of clocks for ages and keep putting the thoughts aside. I would like a laser cutter but the price is always a little too high 🙂 You have done a nice job! How close does it run to time? When you say plaumbing parts, are you suggesting we can get all the bits bar the laser cut ones from Bunnings? 🙂 

As usual, your work is up there 🙂

Dave