I bought an old table on Gumtree for $1, treated the rust on the legs, cut a hole in the centre of the plywood with a jigsaw and used some left over paint to give it a finish. After that off to Bunnings for a $2.69 plastic bowl and made a potting table for my sister who has some mobility issues.
Materials
An old table, Bunnings plastic bowl, left over paint, silicon sealer, rust converter.
Tools
Jigsaw, paint and paintbrush, tape measure, sand paper, homemade circle marker.
Steps
Step 1
Found the table on Gumtree for $1 and collected it.
Step 2
Checked for rust on the metal legs and treated it with Rust Converter.
Step 3
Sanded back the table surface to clean away dirt and marks.
Step 4
Bought a brightly coloured plastic bowl at Bunnings for $2.69.
Step 5
Measured the underside of the bowl and cut a hole in the table top to fit the bowl with a jigsaw.
Step 6
Painted the entire table and sealed the inner circumference of the circle with silicon to seal the cut edge once the paint was dry.
Step 7
Inserted the bowl in the table top and delivered the table to my sister who lives with mobility issues so she can continue to pot her plants.
