Child Item

How to install Jack garden edging strips?

with this product Jack 1180mm x 200 mm garden edge strip

the sections clip together i beleive - should you also install for extra stability - Jack 300 x 80 mm oxy-shield edging stake and at what distance?

also does the product bend - to do corners and curves?

thanks

Find more posts tagged with

Tools and Materials

Gardening

Landscaping

Comments

JacobZ

Hi @Fiona82,

Thank you for your question about installing the Jack 1180mm x 200mm Garden Edging Strips.

The installation guide shows this product being driven into the ground using a hammer and a timber block to prevent damage to the edging strip, however, I suggest it would be a good idea to add Jack 300 x 80mm Oxy-Shield Edging Stakes over each join for added strength and to give everything a clean, uniform look.

This product will easily bend to a light curve and can be bent to sharper angles using the instructions in the above mentioned installation guide.

Let me know if you have any further questions.

Jacob

janetian

https://www.workshop.bunnings.com.au/discussion/comment/42517#Comment_42517

Thank you for the information above regarding Jacks Edging strips. But can you tell me how to cut it to the correct length. Is it just a matter of bending it a few times or what?

Thanks

Janet

EricL

https://www.workshop.bunnings.com.au/discussion/comment/88440#Comment_88440

Hello @janetian

Welcome to the Bunnings workshop community. It's sensational to have you join us.

It is possible to split it up using the fold and bend technique, but it can take some time and can get wearisome. I suggest using a Craftright 250mm Straight Cut Aviation Snips. Please make sure to wear personal protection such as gloves and goggles when cutting the garden edging.

If you need further assistance, please let us know.

Eric

Child Item