How to plaster over wall with tiles removed?

joshuamorrison

I have recently had a laundry reno take place, there is a section next to the cabinet which has had tiles removed. What is a suitable pre mixed product to plaster / render this suitable for painting.

I have some small tubs of the white selleys fillers but this area is far too large for that. Thanks

MitchellMc

Hi @joshuamorrison,

For an area like that, start by removing any loose or flaking material from the wall so you have a solid surface to work on. Once that’s done, you can skim coat the area using a pre-mixed plaster/render.

A good option is the https://www.bunnings.com.au/gyprock-csr-2-25kg-less-mess-topping-compound_p0173348 . It’s ready to use straight from the tub, applies smoothly, and is ideal for repairing areas where tiles have been removed. After it dries, you can sand it back lightly and it will be ready for painting.

Some tips for a smooth finish:

• Apply in thin layers rather than trying to fill it all at once. This helps prevent cracking.
• Use a wide finishing trowel to spread the compound evenly.
• Feather the edges so it blends with the surrounding wall.
• Allow each layer to fully dry before sanding or applying the next coat.
• Once dry, lightly sand with fine-grit sandpaper for a smooth, paint-ready surface.

Always wear a dust mask when sanding and consider safety glasses and gloves to protect your eyes and skin from dust and irritation.

Please let me know if you have any questions.

Mitchell