How to install bistro blinds on patio between brick pillar and wall?

tariqhussain632

For the Patio shown in the picture, I have one side inside distance of 2400mm and other side 3700mm with height from the floor / paving is 2500mm.

I want to install Bistro blinds on both sides but don't have a horizontal timber support for that. Could you please guide me, How can I install the Bistro outdoor blinds here, and what will be appropriate sizes / required accessories. I am happy to consider to install the additional timbers if required as a lost resort.

Thanks

EricL

Hello @tariqhussain632

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about installing bistro blinds in your patio.

I propose looking for the ceiling studs in your ceiling using a stud finder - How to use a stud finder. Once you've located the studs, I suggest using https://www.bunnings.com.au/90-x-45mm-outdoor-framing-h3-treated-pine-2-4m_p8032172 and screwing it with https://www.bunnings.com.au/zenith-10-8-x-100mm-galvanised-countersunk-rib-head-timber-screws-50-pack_p2420881 onto the ceiling studs. Please make sure to double check the measurements between your wall and the post before making your timber purchase. My best advice is to paint the timber piece the same colour as your outdoor ceiling.

For the 2400mm side, I suggest looking at the https://www.bunnings.com.au/bistro-blinds-240-x-240cm-0-75mm-charcoal-pvc-outdoor-bistro-blind_p1287849 . As for the 3700mm side, I recommend looking at a combination set of two https://www.bunnings.com.au/bistro-blinds-180-x-240cm-0-75mm-charcoal-pvc-outdoor-bistro-blind_p1287823 or a set of https://www.bunnings.com.au/bistro-blinds-270-x-240cm-0-75mm-charocal-pvc-outdoor-bistro-blind_p1280136 along with a https://www.bunnings.com.au/bistro-blinds-90-x-240cm-0-75mm-charcoal-pvc-outdoor-bistro-blind_p1280102 . The smaller section can be used as pass through, and the large section will provide partial cover.

Please note that a https://www.bunnings.com.au/bistro-blinds-10-x-240cm-clear-outdoor-bistro-blind-zip-joiner_p1288308 will be necessary to join the blinds together and will affect the overall width.

The blinds can be anchored onto the timber piece using https://www.bunnings.com.au/buildex-14g-x-75mm-class-4-bugle-batten-screws-25-pack_p0890592 . Make sure to check all your measurements before you finalize your fixings.

Here is a handy step-by-step guide: How To Install Bistro Blinds

Please remember to wear personal protection such as gloves and goggles. If you are using a ladder here is a handy safety guide - How to use ladders safely.

If you need further assistance, please let us know.

Eric