How to install flyscreen sliding doors for alfresco area?

Question

Hello everyone, I'm looking to install sliding flyscreen doors here.

The plan is fixed panels on the sides, two sliding doors meeting in the center in the middle.

Not sure what doors yet, but there seems to be some options available, but my main questions are:

* What would be a good way to mount the track to the concrete? (pretty sure it's painted concrete, no tiles)* Dynabolts, epoxy glue, etc?

* What about the ceiling?* Current thought is running a beam across the top, screwing into the smaller wood joiners above the fibro.

Thank you in advance!

Kael · Answer

Hi Eric, thank you for the response, I'll have to make a decision on what doors I'm getting first then!

EricL · Answer

Hello @Kael

Welcome to the Bunnings Workshop community. It's wonderful to have you join us, and thanks for sharing your question about installing flyscreen sliding doors.

My best advice is to speak to the flyscreen manufacturer and asking them what the recommended fixing method is to anchor the flyscreen frame to your brick surface. My best advice is to use stainless steel screws or fixings so that there will be no galvanic reaction. Using wall plugs will definitely be necessary, but as to the length of the screw and what type of screw head to use is at the discretion of the manufacturer.

If you look at your sliding door assembly in your home, you'll see that the fixing screws are very well hidden giving it a very clean appearance. The same technique might be necessary for your flyscreen, but the only way to find out is to speak to the manufacturer. They will also be able to tell you if a timber piece will be necessary for the top section of your flyscreen assembly.

If you need further assistance, please let us know.

Eric