🖼️
The project:
This was just a plain wall with some canvas’. We wanted to elevate the space and create an area that we could all sit in and watch movies, with the comfort and ambiance of the fireplace.
- Materials:
90 x 35mm Framing MGP10 Untreated Pine 2.4m https://www.bunnings.com.au/90-x-35mm-framing-mgp10-untreated-pine-2-4m_p8030056SpecRite 2700 x 600 x 21mm Black Oak Timber Acoustic Panel https://www.bunnings.com.au/specrite-2700-x-600-x-21mm-black-oak-timber-acoustic-panel_p0455961SpecRite 2700 x 26 x 21mm Black Oak Acoustic Panel End Cap https://www.bunnings.com.au/specrite-2700-x-26-x-21mm-black-oak-acoustic-panel-end-cap_p0749778Scandia 50" Aurora Electric Fire https://www.bunnings.com.au/scandia-50-aurora-electric-fire_p0411392Titan 75 x 3.06mm Bright Steel Collated Framing Nails - 3000 Box https://www.bunnings.com.au/titan-75-x-3-06mm-bright-steel-collated-framing-nails-3000-box_p0571385
- Tools:
Nail gun
Circular saw
Tape measure
Carpenters pencil
Hammer
Square
Nails
Black pan head screws
T17 chipboard screws
- Step 1:
Measured out space, drew out design and planned materials. Used ChatGPT for inspiration but had to rely on own measurements for the build.
- Step 2:
Purchased products from Bunnings and then begun by measuring out frame pieces cut and built frame with cavities to suit TV and fireplace out doors.
- Step 3:
Braced internal wall for frame and television.
- Step 4:
Screwed frame to braces and cladded wall with black acoustic panels.
- Step 5:
Wired up and mounted Fireplace and Television
- Step 6:
finished product
