How to cut and install Syneco Slat decking tiles?

Billyjeans

Hi there, i am not that handy person, how can i get the cut these tiles around gutters? circular saw or jigsaw?

plus do i need any adhesive? could you please what trim i can use for hiding the corner?

and do i need any deck oil? i am planning to install in patio in straight lines.

Regards,

Billy

JacobZ

Hi @Billyjeans,

Welcome to the Bunnings Workshop community, it is fantastic to have you with us.

Could you advise whether you are referring to the polypropylene decking tiles like the https://www.bunnings.com.au/syneco-30x30x2cm-polypropylene-4-slats-decking-tile-dark-brown-9-pack_p0888835 or the timber ones with polypropylene base, like the https://www.bunnings.com.au/syneco-30-x-30-x-2-2cm-natural-acacia-4-slat-decking-tiles-9-pack_p0848175 ?

You might like to start by having a read of the installation guide which can be found here.

Regardless of which you use, a circular saw could be used for straight cuts, and a jigsaw can be used for round or angled cuts. If you could upload some photos of the gutters you are looking to work around, this could certainly help give us an idea of what option would be better. Let me know if you need a hand with this.

These decking tiles are also designed to simply clip together and sit in place; there is no need for any adhesives.

There is no need for decking oil with the polypropylene version and the acacia tiles are naturally finished, but a decking oil can be used to offer further protection, particularly on the cut ends.

In terms of trim for the corner, I would need to see where you are planning to install them to have a good idea of what would work. Is the plan to install them entirely up against walls? Or would they finish on a flat surface where the edge is exposed?

If you could advise, I can certainly offer recommendations.

Jacob