How to add lock to sliding door handle?

Question

Hi everyone!

I’m hoping to change the handles on my sliding fly screen doors to locking handles, but not sure how to go about it. I’ve attached some photos of the current handle.

Is there a specific locking handle I should be looking at getting? It’s not for security purposes as its only aluminium fly screen, mainly just so I can let fresh air in without the indoor cat pulling the door open.

I would assume it depends on the handle, but would I need to do any cutting or drilling? Or is there something that would fit straight into what’s already there?

I’m a rookie at these things, so thank you so much!

sfpercy · Answer

thank you so much Eric! I’ll look into those options

EricL · Answer

Hello @sfpercy

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about installing a lock on your sliding door.

A quick easy lock to install would be the

https://www.bunnings.com.au/rolltrak-flyscreen-latch-set_p0356136

. It will be necessary to drill into the aluminium frame but there would be no need to drill large holes into its structure. Please note that the installation of this lock depends on the door's current configuration. There must be enough space for the lock and receiver so that it operates properly.

However, locks such as the

https://www.bunnings.com.au/rolltrak-black-sliding-screen-door-lock_p4062465

or similar will require the services of a door lock installer. Cutting large installation holes into the aluminium frame must be exact and mistakes along with repairs could be very costly. So, I would advise leaving this to the professionals.

I also suggest checking out the stores Door Lock Installation service, especially if you are looking for a professional to install your door lock.

If you have any other questions we can help with, please let us know.

Eric