Child Item

How to attach washing machine to kitchen tap as and when needed?

I don't have a dedicated space for a washing machine in my unit, so I would need to hook it up to the kitchen sink as and when I need it. I have been advised that this can be achieved by an adaptor (Like this one) on my kitchen sink tap and the drain pipe also hooked over the kitchen sink.

How do I know what size adaptor will fit my tap? I unscrewed the aerator and measured it. Looks to be around 2.5cm. Engraved on the part is "neoperl Perlator HC PCA 7.0l" I found this manufacturer's website but can't really make head nor tail of it!

Any ideas what product in Bunnings will be suitable for this task? Also, how about the hook to hook the drain pipe over the sink... Do they come with the machine or will I have to purchase that separately?

Community manager's note: Check out How to connect a dishwasher for expert advice.

20200722_130505 (FILEminimizer).jpg 20200722_130517 (FILEminimizer).jpg 20200722_130626 (FILEminimizer).jpg

Find more posts tagged with

Plumbing

Accepted answers

redracer01

Hello @ShelleyBean

Below are the parts you will need to connect your washing machine to your sink mixer. The kit is generic but I reckon you have a 90% chance of it fitting in to your existing tap. Good luck and stay safe. Tell us if it works!

Cheers,

Red

The middle ring is the one that goes on first followed by the ring on the right (2nd).Make sure to put plumbers tape on the (2nd ring) before screwing this on to it. You can the put more plumbers tape to this before attaching the washing machine hose.

All comments

ShelleyBean

UPDATE: I'm actually now very confused because I just phoned Bunnings and spoke to someone in the plumbing department. He told me, "there is no adaptor big enough to attach a washing machine to a kitchen tap, the ONLY way to do it is under the sink with a Y splitter".

That's a complete lie - there are plenty of YouTube videos like this one that says it is very possible. I just need help with exactly what adaptor to get - what it's called and what size I need.

Why are Bunnings staff lying to customers?? 😠

Jason

Hi @ShelleyBean,

Sorry to see you're upset and confused. I'm sure the Bunnings team member was doing his absolute best to assist and let you know that to the best of his knowledge there isn't a product available in Bunnings stores that will meet your needs. I note that the video you reference is American, which can be a problem when researching on YouTube as local products and requirements can differ.

I will ask the ever-helpful @MitchellMc to assist you when he is back on the site tomorrow. Many thanks for your patience in the meantime. Let me also tag helpful members @LePallet and @redracer01 to see if they might like to share their thoughts on solutions for you.

Thanks,

Jason

ShelleyBean

Thank you @Jason

The Team member was adamant that there was no such item for this task (either in Bunnings or otherwise). I have posted my problem in another forum in Australia, where there are plumbers/DIY people and they said there is definitely such a thing. In my OP, there is a link to one actually on Bunnings website. All I wanted to know is if this was the right size for my tap. I hope someone can help me with this.

redracer01

Hello @ShelleyBean

Cheers,

Red

MitchellMc

Hi @ShelleyBean,

I just wanted to add that the product @redracer01 has recommended is the one I would have suggested to you. To the best of my knowledge, this is the most appropriate product in our range to suit your purpose. As redracer01 has mentioned there are a few different thread patterns, but there is a very high chance that this product will fit and solve your issue.

Please let me know if you require further assistance or had any questions.

Mitchell

ShelleyBean

Thank you everyone for your help. In the end, I decided to just hire a plumber to come and sort it out for me. I pretty much ran out of clean clothes and had other things to get on with. Also trying to go out as little as possible and avoid public transport at the moment, so figured on this occasion it was the right thing to do. Not cheap though ($200 later)! But at least I know I won't flood my kitchen with some dodgy first-time-DIYer setup 🤠

Jason

No worries, thanks for letting us know @ShelleyBean.

Please don't hesitate to post anytime need assistance with a project around the house and garden. We're here to help.

Jason

diynovice

Hi! I'm trying to do this right now, and I purchased the adaptor kit, but I cannot find a piece that couples it to the washing machine hose! Could you or anyone from Bunnings advise??

MitchellMc

Welcome to the Bunnings Workshop community @diynovice. It's sensational to have you join us, and many thanks for your question about connecting a washing machine.

If the 15mm thread on the adaptor kit is too small for your washing machine hose, then you can change it to 20mm with a Brasshards 20 x 15mm Brass Threaded Hex Reducing Bush. You'll need to apply some thread tape before joining the fittings.

Please let me know if you have any questions.

Mitchell

diynovice

Hi Mitchell,

thanks for replying. I purchased that and it doesn’t fit on the washing machine hose. So I would need to get a smaller one.

but my question is: if I assume

piece 1 is the quick fit tap spout, then that goes onto tap. But then what does that snap into? Like with a hose attachment there should be another piece that it locks too shouldn’t there?

MitchellMc

The click-on adaptor is for garden hoses or for trying to cobble together a washing machine hose that you can disconnect @diynovice. Are you looking to remove the hose regularly? If you need to disconnect frequently, check out this discussion by @MinB on Benchtop dishwasher tap connections. Dishwashers and washing machines share a similar connection.

If you want to connect your washing machine hose you'll only be using the threaded position of the adaptor kit which gives you a 15mm threaded section that a hose should screw onto. The next smaller size in threaded fitting from 20mm is 15mm, and that's included in the kit.

Perhaps you might like to show us some images of what you have and the difference in the size of your washing machine threaded fitting.

Mitchell

diynovice

Hi Mitchell,

thank you so much for all your help! I was trying to set it up to be regularly disconnected! So I was doing the wrong thing, so looks like I have the wrong pieces! I will proceed with that other post that you have eluded to.

Again, thank you for all your help!

MitchellMc

Keep us updated @diynovice, I'm keen to assist you in resolving this issue.

Mitchell

diynovice

Hi Mitchell,

I got it all set up and it seems to be working using the products from the other forum page you mentioned. However I have a question. should I turn off the water inbetween the wash and the rinse? If the water isn't being pulled into the machine but the tap stays on will water keep coming through the hose? or will it automatically stop? I know this may sound like a stupid question, but I noticed when the tap was on, but the washing machine wasn't pulling the water through it seems to be leaking at the faucet, so it seemed like maybe there was too much water pressure with no where to go.

Thanks in advance!

EricL

Hi @diynovice

The washing machine has its own shut off valve so there is no need to turn the kitchen tap off when the unit is in operation. If you're still getting a leak, I suggest re-tightening the fittings or adding more plumbers tape to secure the connections. When the washing machine shutoff valve activates, there should be no leaks or the leak should be very slow and almost unnoticeable.

If you need further assistance, please let us know.

Eric

traclewy

Hi,

Being a newbie to this, I have the same question about attaching a washingmachine hose (a moveable washing maching in a unit with no laundry and tiny bathroom) to a flick mixer tap in my kitchen.

The query above came from 2 years ago so I am hoping in that time a very inventive, handy, clever male has come up with something better.

Is the thread in this discussion still the only way to attach the washing machine hose in my kitchen ?

Cheers

Tracey

EricL

Hello @traclewy

The good news is that there is a new method of attaching your washing machine hose to your basin or kitchen tap. The new fitting is composed of two brass Holman quick-release mechanisms a garden hose and some hose clips. You'll still need to use the Kinetic Adaptor Aerator Kit to link the hoses together. Have a look at this discussion - Benchtop dishwasher quick-release connection by @jenenev

These are the parts you'll need:

Holman 12mm Brass Barbed Connector (2x)

Toledo 11-18mm Perforated Hose Clamp (2X)

Nylex 12mm Brass Sprinkler Adaptor (1X) make sure that the threaded end is sized at 20mm.

You'll also need a bit of hose from your garden hose. I suggest cutting off at least 100mm so that it has room to bend. If you wish to have a longer hose cut it to your requirement. To assemble the parts, simply place the hose clamps in the middle of the hose and attach the brass barbed connector on each end. Move the clamps into position over the barbed fittings and secure tightly. Attach the brass adapter to your washing machine hose and make sure that it is tightly screwed on to prevent leaks.

Remove the aerator from your tap and attach the kinetic adapter with the garden hose fitting. Attach your newly assembled adapter to the tap and attach the washing hose to the other end. Slowly turn on the water to make sure that there are no leaks. Double-check your connections and test your washing machine.

Please keep us updated with your progress, we look forward to seeing your washing machine connected to your tap.

If you need further assistance, please let us know.

Eric

Child Item