New pergola

Hey All,

I thought I'd share some of the projects we have been working on at our new house. Here's some images of our new pergola, we think it's pretty great. Best of all every time we work on a project we learn something new and gain more and more confidence to give something bigger and better a crack!

Let me know if you have any questions, happy to share any tips and tricks. 🙂

P.S: Ignore the funny looking stormwater pipes in the back, we hadn't yet connected it properly in these pics.

Find more posts tagged with

Renovation

Building and Construction

Fencing and Screening

Comments

Jason

Wow, wonderful work @DIYgals. You should feel really proud of what you have achieved. It looks fantastic and I'm sure will inspire plenty of other Bunnings Workshop community members. Many thanks for sharing the photos and the terrific time-lapse video. We will feature your handiwork on our Project Gallery.

Let me extend a very warm welcome to the Bunnings Workshop community. It's fantastic to have you join us. You obviously have a lot of skills, experience and knowledge to share with other members so we are looking forward to reading about all your projects and plans for around the house and garden. We trust that in return you will also get plenty of helpful information, advice and inspiration from other members - you'll see we have loads of like-minded people on the site sharing terrific projects every day.

Please let me know if you ever need a hand getting the most from the site, or have any feedback about how we can improve Workshop for you.

Jason

DIYgals

https://www.workshop.bunnings.com.au/discussion/comment/12299#Comment_12299

Thanks so much Jason!

We have learnt so much from others on forums such as the Bunnings Workshop community, hopefully we can help some others do the same. 🙂

MitchellMc

https://www.workshop.bunnings.com.au/discussion/comment/68610#Comment_68610

Very skilled work, @DIYgals!

I'd like to know if there was anything you'd have done differently or if you ran into any issues during construction.

Many thanks for sharing, as I trust your build will be of great inspiration to our other members.

Well done.

Mitchell

DIYgals

https://www.workshop.bunnings.com.au/discussion/comment/97239#Comment_97239

Thanks @MitchellMc,

Things ran very smoothly for the pergola. We had issues with internal gutter brackets, we found they were a bit difficult to work with and get the correct fall. We switched to external brackets on the studio and shed and found they were much easier to work with.

Itai

https://www.workshop.bunnings.com.au/discussion/comment/115265#Comment_115265

Hey @DIYgals

This looks great! Well done!

Couple of questions:
1. What sort of posts are those? Look like steel? Colourbond posts perhaps? What length are they?

2. Did you buy a pre-fab kit, or build from scratch? Do you have any designs or drawings you might share?

3. Do you have any in progress shots of the deck and designs/drawings too?

4. Would you be able to add a photo of how you've attached the lights? Do you think I would be able to attach a ceiling fan if I use a similar design?

Thanks

itai

DIYgals

https://www.workshop.bunnings.com.au/discussion/comment/125502#Comment_125502

Thanks @Itai ,

Yes, these are painted galvanised steel.

We designed and built this from scratch. I'm sure we have some drawing we would be happy to share with you. Send me a private message.

Yes, I will upload a better photo of the lights, we have electrical facilities to install a fan but haven't yet got around to that one.

Thanks,

Lauren

shauny

https://www.workshop.bunnings.com.au/discussion/comment/132360#Comment_132360

@DIYgals Just wanted to check with you what size your beams are for scale, and is it just two bolts drilled through the post and beam?

Final question, did you set your gal posts into concrete or use a bracket on a concrete pad?

Your deck and pergola are exactly what I am wanting to build, just done to the size I need to fit in with.

Your's came up great!

DIYgals

https://www.workshop.bunnings.com.au/discussion/comment/136617#Comment_136617

Hi @shauny ,

The beams are 240x45x5300 ad 240X45x5100, two large bolts are used to attach each end to the galv posts.

We set out galv. posts into concrete. We dug larger concrete footings and poured concrete pads to get the correct heights first ( I wish I had a photo of this to show you), allowed the pads to dry and then set the posts on the pads and cemented in.

Let me know if you have any other questions.

Good luck with the project ahead!

🙂

pats6182

HI @DIYgals looks awesome! How did you attach the rafters to the beams. Did you skewnail or screwed it in? What size battens did you use?

Thanks

EricL

Hi @pats6182

Thanks for joining the discussion. Let me tag @DIYgals to make them aware of your questions. Are you planning to build your own pergola? Any updates you can provide while building it would be much appreciated. If you have any questions, please don't hesitate to post them. Our members would be more than happy to provide advice and information.

If you need further assistance, please let us know.

Eric

DIYgals

https://www.workshop.bunnings.com.au/discussion/comment/16324#Comment_16324

Hi @pats6182 ,

The size of the timbers we used are as follows:

Posts: 90x90

Beams: 240x45

Rafters :140x45

Purlins: 70x45

The beams are bolted to the posts. We used these brackets (size may be different) and screws to fix the rafters to the beams.

There are heaps of timber span charts available online to help you decide what sizes are best for your design.

It's probably worth noting that the design was signed off and plans were submitted to council by a local engineer to ensure it meets the standards for our location.

Good luck with your project!

🙂

pats6182

https://www.workshop.bunnings.com.au/discussion/comment/70769#Comment_70769

Hi @DIYgals thanks for responding and sharing your tips. I was planning to use triple grips but these grips can be seen so was looking for an alternative.

Child Item