-
How to build a circular vanity table?
Hi Bunnings team, I am hoping to DIY my own circular vanity table, and have found an online guide that involved making one out of a large cardboard tube (see picture). Does Bunnings stock anything similar? or do you have any suggestions as to how I might DIY this vanity? Thanks!
-
Where to find gel stains?
Hi all! I do a bit of woodwork in my spare time and have noticed that lots of Smerican woodworkers get beautiful finishes using "gel stain" products. I have had a look around and cant seem to find anything like this at Bunnings, does it go by another name? Thanks!
-
What sort of lighting would be best for our back patio?
Hi workshop community! We have an old single sheet metal roofed patio out the back of our house. The patio is lit by a fluro tube light that has seen better days, and because the patio is quite low my husband hits his head on this light at least once a month. We are looking to replace the light and hopefully allow more…
-
How to buy outdoor structural treated Pine?
Hi all! I'm looking at building an outdoor bike shelter and am hoping to buy some H3 treated structural pine like this: https://www.bunnings.com.au/90-x-45mm-l-m-outdoor-framing-mgp10-h3-treated-pine_p8032162?fbclid=IwAR0Rll2TPCAtvHyVxmWPpOVB5TmotxtIwuCBJRuSGcZvNtGiN11qVCf16Pk When I look on the bunnings website, it says…
-
How to compact road base for a paving job?
Hi Workshop crew, We are planning a small paving job out the front of our house. We have done lots of research and know that levelling and compacting the road base layer is super important as it will be going on loose sandy soil. I am wondering if anyone has any suggestions on how to best compact the road base? I'm not…
-
What material for a floating desk with a solid timber look?
Hi Workshop community! Long time reader, first time poster 🙂 I am looking for advice on what surface to use as a desk-top, as I am hopefully going to build a floating desk in our study. I am hoping for the desk to look like its made of solid timber (reference image below), and am open to the ideas of veneer/laminate if it…
