-
How to demolish the built in oven wall cabinet?
Hi there, I need help with removing the built-in oven, demolishing the wall cabinet, and removing the kitchen door (which connects the garage to the kitchen). The plan is to remove the old oven and the wall cabinet to create more space for a longer kitchen benchtop. I have attached some pics for reference. Thank you, Mac.🙂
-
How to remove a roof tile when all tiles are screwed down?
Hey there, Please help me to remove a tile from the roof. I’m trying to install a whirlybird on my roof, but I found that all the tiles are screwed down—not nailed. I need to remove the 3rd tile from the top of the roof, but I’m finding it hard and frustrating. I have attached the screw pic and tile pics. Thank you Mac
-
How to fix ceiling patch shade?
Hi there, I repaired the ceiling crack using Selley's gap filler, applied joint tape, and covered the area with multipurpose compound after sanding it with a sanding block. I used primer and then applied white color. However, some patched areas on the ceiling now appear to have a different shade. What should I do to fix…
-
How to fix storm water downpipe overflowing?
Hi, I had my roof gutters cleaned by a professional service about a month ago, and they confirmed that all the downpipes were clear. However, after today's heavy rain, I noticed that two of the downpipes are overflowing from the drain. I drilled out the small rivet on the bend of the downpipe to open the stormwater…
-
How to remove tv antenna bracket located underneath a roof tile?
Hi there, I noticed that one of the roof tiles has lifted, and I found out that it's because of the TV antenna bracket. The antenna is already disconnected, and there’s no TV socket inside the house, so I don’t need to keep the antenna. Can you help me with how to pull out the roof tile and remove the TV antenna bracket?…
-
How to fix squeaking vinyl floor plank?
I moved to a new house and noticed that many vinyl planks were lifted and squeaking when I walked through it. I bought Dunlop vinyl adhesive and a putty knife. I don't know how to start this work. I have noticed the transition strips are also not installed properly. I have attached here some photos for reference. Please…
