Hi, This is a bathroom ceiling. All of the ceiling is in the same condition. You can literally peel it off with your hands. I think it will all just peel off. What should I do in this instance? Just peel it all off?
Hi @gloriavee,
Anything that can easily be peeled off needs to be removed. I'd suggest using a UNi-PRO 75mm Angled Heavy Duty Paint Scraper on an extension pole. If you manage to reach a section that is still well adhered, you can use Zinsser 0.95L Peel Stop Clear Binding Primer over it. However, it's best to remove as much of the delaminated paint as possible because anything that hasn't peeled off is likely to in the future.
You should find this step-by-step guide useful: How to paint a ceiling.
Please let me know if you have any questions.
Mitchell
Hi
I recently posted about my bathroom ceiling that had paint coming off it. I took your advice and got the necessary tools. However those patches you see are difficult to get out. Looks like some filler was applied at some point in some areas. What should I do now? Sand and paint? Please guide me as to what to do and what I need to purchase from Bunnings. Looks terrible in this state. Thank you!
It needs to be "dead smooth" before painting. Run your fingers over the "hard edges" where the paint ends abruptly...feel a bump? all that needs sanding so its no longer a hard edge - else once its painted it will show all the imperfections. Once you cant feel any more bumps - grab a torch and shine it from different angles to double check theres no more bumps while running your fingers across the areasThe old filler you mention - make sure its dead flat and level with the rest of the ceiling, if its not flat, sand it until it is flat - If theres parts of the ceiling that are sunken or dented in - add bog to fill the dents etc and allow to dry - then sand the bog back until its dead smoothYou dont have to remove all the old paint on the entire ceiling - but you do have to fix all the "dodgy" bits where paint might be lifting etc and remove those bits and get them all dead flat.... DONT PANIC - It all looks pretty normal for the kind of work your doing sofar - it will come up nicely if you dont rush this part of cleaning and levelingI use a small ryobi orbital sander for jobs like yours but I had alot of rooms to fix (manually sanding by hand can take alot of time)
Hello @gloriavee
It's great that you've received very good advice from @Prawns. Just to add to the suggestions made, I recommend using the Ozito ¼ Sheet Orbital Sander. It's an excellent orbital sander capable of using standard sandpaper. It makes it very convenient as you won't have to get any specialized pads for the sander. I also suggest getting the Bear Disposable Paint Mask With Active Carbon Filter And Valve - 2 Pack in conjunction with Protector Wide Vision Safety Goggles. These two safety products will protect you from the dust that will be generated from all the sanding. Please remember to take your time so that you get a flawless finish.
Please keep us updated with your progress, we look forward to seeing your bathroom ceiling refreshed.
If you need further assistance, please let us know.
Eric
Thank you so much! Yes in a panic! I will take your tips and advice. I did think I had to take it all off. I will take my time.
Thank you again.
Thank you. I will take up your suggestions. Yes I will keep you updated.
I appreciate all your advise. Thanks again.
This is great. I need to do mine. Thanks
Shout out if you need a hand, @Jeanagh.
Thanks Mitchell I will. Like all my projects, I have no idea what I'm doing so the advice on here and YouTube is paramount
Hi Mitchell,
The ensuite in our apartment has small bits peeling. Only 7 year old building so I’m assuming poor ventilation as the water sprinkler fitting is all rusty too. We’ve also got mould appearing around the edges of both bathrooms now despite cleaning the fans and ensuring they run longer and doors open.
Would we also sand the spots that keep growing mould? I was then going to repaint both ceilings with the mould preventative additive to the paint.
Hi @Xi,
Welcome to the Bunnings Workshop community, it is fantastic to have you with us.
Moisture will certainly play a part, being in a bathroom, but seeing the severity of the issue will help to direct our approach. It may be a simple case of managing the mould and then painting over it, or it could mean stripping back the paint, dealing with the mould, repriming and then painting with a ceiling paint with mould-preventing additive. It all depends on the circumstances, so seeing it will be a great help in determining the approach.
Have you got any photos that you could share? If you need a hand with uploading photos, please let me know.
It does sound like the ensuite has been struggling with excess moisture for a while. The rusting sprinkler head and the mould forming around the ceiling edges are both signs that humidity is not being removed fast enough. Even when the fans are running longer, they might not be moving enough air, so it can help to check the actual suction by holding a piece of toilet paper over the grille to see if it sticks. If the fan has weak suction, the first step is to remove the cover and clean dust from the blades and the ducting, since buildup can drastically cut airflow. If suction is still poor, the duct may be blocked or the fan may be undersized for the room, in which case clearing the duct or upgrading to a higher capacity exhaust fan is usually needed to keep moisture under control. If there is a window, opening it during and after showers will also improve airflow and drastically reduce moisture in the room. Additionally, keeping the fan on for at least twenty minutes after each shower also makes a noticeable difference.
For the mould that keeps returning, it is fine to sand those areas, but only after treating them. Clean the mould first with a mould cleaner, following the instructions closely, then rinse and allow the surface to dry. Once the mould is neutralised, you can give it a light sand to remove any roughness, just ensure you wear a mask to protect yourself. A light sand will help remove the remaining residue and give you a good base for repainting. Ensure you wipe away any dust after sanding.
With flaking paint, it is likely that you will have to prime the ceiling in some capacity, so using a mould inhibiting primer like Taubmans 1L Advanced Adhesion And Mould Blocker or Dulux 1L PRECISION Stain & Mould Blocker, then painting over it with a bathroom ceiling paint like this Dulux White Ceiling +PLUS Kitchen And Bathroom Paint or a standard ceiling paint with Protite Mould Defender Paint Additive would be the way to go.
Hopefully, this answers a few questions. I will happily assist further if you have further information or photos that you can provide.
Jacob
Hi Jacob,
Thanks for the reply.
First thing we did when we moved in was dismantle both fans and give them a thorough clean (clearly had never been properly cleaned). That did improve their function, but we might see if we can get even better ones to fit. We always run them for longer after we finish showering and leave doors open to keep them vented as best we can.
I have attached photos of the small ensuite, it has little peeling bits and small specs of mould. The main bathroom doesn't have peeling, maybe a couple of small cracks in the paint and similar mould around the edges that I've tried previously to clean off but has come back (assuming with this humid weather).
Hello @Xi
I suggest following Jacob's recommendation in regards to re-painting your ceiling.
