I have replaced my existing bathroom vanity with a new one and need some feedback & suggestions for the waste/drain plumbing.
I know I should have hired a licensed plumber to do this, but I am on a budget here. I need some feedback on the plumbing and know if what I have done is satisfactory or does it need any improvement.
The connection/joint between the trap and PVC pipe does not look correct to me. It seems there is some size difference or I need to use some sort of adapter for this joint. I have tested the fitting for water leaks by manually pouring water in the basin and confirmed there is no leak.
So far all plumbing is draft and I have not yet glued any joints so I have the option of redoing the joints if I need to.
I have also included a photo from the old vanity showing the previous plumbing work.
Thank you in advance for your time.



