Child Item

How to remove acrylic tap handles ?

Can anyone please help me identify these shrouded taps, and/or tell me how to get the handles off ? I've had a look on YouTube, and everywhere else, but I can't find them. There's no button to hide a locking screw, no grub screw through to the spindle, and no threaded lock-ring under the shroud that I can see. If they are simply push-on, pull-off, they are on very, very tight, and I am worried I might break them if I try to force them. Additional photos below for ID. Any assistance greatly appreciated. Many thanks. Steve

Find more posts tagged with

Plumbing

Accepted answers

EricL

Hello @hassall147

Welcome to the Bunnings Workshop community. Thank you for joining us and sharing your question about removing your tap handle.

It looks like a traditional skirt-fixed handle. I suggest giving this method a try. Hold the top plastic handle steady with one hand. Place your other hand on the silver skirt under the plastic handle. Keeping the plastic top steady, turn the silver skirt anti-clockwise. If the skirt moves and makes it tighter go in the other direction.

If it is too difficult to remove, I recommend replacing it with the Estilo Chrome Washing Machine Set. Easy to install and works with almost all types of washing machines.

Please keep us updated, if you need more information please let us know.

Eric

All comments

EricL

Hello @hassall147

Welcome to the Bunnings Workshop community. Thank you for joining us and sharing your question about removing your tap handle.

If it is too difficult to remove, I recommend replacing it with the Estilo Chrome Washing Machine Set. Easy to install and works with almost all types of washing machines.

Please keep us updated, if you need more information please let us know.

Eric

hassall147

Eric ! ... It worked !! You are a lifesaver. Thank you very much for your prompt reply. Very much appreciated. 👍

EricL

Hi @hassall147

I'm delighted that you've managed to remove the handle from the tap assembly. Your next step is to either repair the unit or find a suitable replacement. We would love to see a photo update once you've repaired your washing machine taps.

If you need further assistance or information, please let us know.

Eric

idjohnsto

Thank you Eric for your invaluable advice. I have identical kitchen tap handles installed (circa 1988) to hassall147‘s tap handles. Your instructions worked immediately.

Regards, idjohnsto

ps: I was led to hassall147‘s tap handle inquiry and your advice by using the Google reverse image search.

Google Search Help explains how to do such image searches at https://support.google.com/websearch/answer/1325808?hl=en&co=GENIE.Platform%3DiOS

Jason

Good good @idjohnsto, many thanks for letting us know this discussion was helpful to you. As you browse the Bunnings Workshop site you'll find our wonderful community is sharing loads of helpful advice and inspiring projects on the site every day. Please don't hesitate to post anytime you need a hand - we're here to help.

Welcome aboard,

Jason

Tuhin

Hi Eric, I’ve got a similar problem. I’ve tried using a rench spanner but given it totally round not getting enough grip to turn.
any suggestions would be very helpful.

JacobZ

Hi @Tuhin,

Welcome to the Bunnings Workshop community, it is fantastic to have you with us.

Can I trouble you to upload some photos of the taps? This will help our members visualise the issue and offer their best advice.

Let me know if you need a hand uploading images. I am happy to help if required.

A trick that could help is to wrap the cylindrical piece with a few layers of electrical tape. This can add grip that your strap wrench or a set of multigrip pliers can get a better purchase on.

Once I can see the tap, I will assist further.

Jacob

Tuhin

thanks for your suggestion, I’ll give it a go but this is the one I’m talking about

JacobZ

Hi @Tuhin,

If you have no success, please let me know so I can assist further.

Jacob

Child Item