Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Replacing laundry tub/cabinet

Renomum
New Contributor

Replacing laundry tub/cabinet

Hi all, my first post in a long time.  I want to replace an old 1990s laundry corner tub/cabinet.  Has anyone done this themselves or do I need a plumber?  I did get a quote from a plumber but it seemed rather excessive?  Im happy to lose the tiles in the process if needs be :smile:

 

 

IMG_7726.JPGIMG_7727.JPGIMG_7728.JPG

AprilGrim
Junior Contributor

Re: Replacing laundry tub/cabinet

Hi @Renomum 

 

I had the same tub as yours - I’ve just finished the removing stage, where I ripped the trough out and took yucky old tiles off the wall so I can’t help much for anything install-wise. 

Maybe this will help, these are just some things I did when I pulled my own out.

 

The top of the sink will have a metal lip that the tiles will be covering.  I had to remove the tiles first. 

The cabinet was secured to the wall with both liquid nails and screws. The screws are under the sink, two just underneath and two lower down towards the bottom. 

I unscrewed the plumbing and as I don’t have any caps for the open pipes I used a garbage bag secured firmly over the ends with a hair elastic. 


I had to cut a flap in the front of the cabinet in order to pull the sink backwards and out, as my taps are too low to just lift the sink up. 

I had to use tin snips (power tools scare me after seeing the way my dad, who is a builder, hurt himself many times over the years) and cut a big hole in the metal flooring around the pipes so the whole cabinet could be lifted up and over once the sink was removed and all the plumbing disconnected. 

To use my washing machine in the meantime I have a long outlet hose that empties on my lawn - I connect it to the wm outlet when I run a cycle. Lawn loves it! 

 

I’m a first time DIY and everything i do seems to take a long time, so I’m sure there’s a faster way, but just sharing how I removed it 😊

 

Reply
Loading...
MitchellMc
Bunnings Team Member
Bunnings Team Member

Re: Replacing laundry tub/cabinet

Congratulations on your first post within the community after being a member for quite some time @Renomum

 

It's fantastic to see that @AprilGrim has already provided some great assistance and hopefully answered most of your questions. If you are just swapping the tub out and not changing the locations of the taps then this is a relatively straight forward project that requires only basic D.I.Y. skills.

 

If you have questions please let us know and I trust we can guide you through the rest of the process.

 

Mitchell

 

See something interesting? Give it the thumbs up!
Reply
Loading...
Renomum
New Contributor

Re: Replacing laundry tub/cabinet

Yes, not changing location of taps, so would love to be able to do the job myself :smile:  Are there links to other instructions/steps that are available?

Reply
Loading...
MitchellMc
Bunnings Team Member
Bunnings Team Member

Re: Replacing laundry tub/cabinet

Not that I am aware of @Renomum.

 

I believe you'll find the removal a fairly simple procedure. I would follow the instructions @AprilGrim has provided as it seems to have worked well for them. 

 

Start by unscrewing the plumbing work under the sink. You'll find a pair of Craftright 250mm Multigrip Pliers will come in handy for undoing the large nuts. You'll find one nut under the sink waste and the other midway up the downpipe under the S bend. Once these are unscrewed, see if it releases the bowl. You might find the bowl has a lip at the wall which has been tiled over. If so, you need to remove the tiles. A hammer and chisel will make short work of that. The bowl should now be released and you can remove it from the cabinet. If it is still stuck, check for clips inside the cabinet holding it in place. Once the bowl is removed, have a look to see if and how the cabinet is fixed to the wall. If you are lucky, it will just be free standing and not fixed to the wall. My cabinet is not fixed at all. When you have undone any screws the cabinet should be free, it's just a matter of lifting it up and out of position then.

 

Please let me know if you have any questions. I'd encourage you to give it a go and let us know if you get stuck. We're here to help.

 

Mitchell

 

See something interesting? Give it the thumbs up!
Reply
Loading...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects